No results were found for the filter!
Freefly Accessory Clamp (15mm)
Using four of these 15mm aluminum accessory mount clamps allows users to attach the Cargo Tray to the Cargo Landing Gear via two M3 threaded holes, or to mount any other accessory off of the 15mm landing gear down tubes or cross braces....
€27.00
*
Freefly Cargo Landing Gear
Freefly Cargo Landing Gear provides Alta users with an expandable and adaptable platform to help speed the integration of their custom payloads. The Cargo Landing Gear can be used for package delivery, LiDAR setups, logging, LED lights,...
€1,250.00
*
Freefly Alta X Short Quick Release Mount
The Alta X Short Quick Release Mount allows Alta X users to mount Toad in the Hole equipped payloads or landing gear directly to the bottom / top of the Alta X bypassing the standard vibration isolation system. For some use cases rigid...
€165.00
*
Freefly Cargo Tray Kit
Upgrade your Cargo Landing Gear or Alta X with the Cargo Tray Kit! This Cargo Tray allows you to deliver packages on top of the Alta X, or can be added to the Cargo Landing Gear to allow bottom mounted package delivery on a Toad in the...
€327.00
*
Freefly Carbon Tube Kit (for Cargo Landing Gear)
Carbon Tube 15 x 180mm Kit This kit comes with four 15mm Carbon tubes that are 180mm long. These tubes are 270mm shorter than the stock Cargo Landing Gear tubes (450mm stock length) and can be used to make a shorter landing gear or used...
From €44.00
*
Freefly Alta X Vibration Isolator Cartridges
These tool-less vibration isolator cartridges come in different durometers (stiffness) for different payload weights and flying conditions. You can even mix and match durometers to expand your options, up to nine total cartridges....
€99.00
*
NODO Inertia Wheels
The NODO Inertia Wheels 2-Axis or 3-Axis is a wireless long-range digital camera controller featuring roprietary Inertia Motors™ inside the wheels. The Inertia Wheels are compatible with Freefly MoVI line of gimbals as well as a range of...
From €6,200.00
*
NODO Inertia Wheels RX to Freefly MoVI Pro/XL
Connect the Inertia Wheels Receiver (RX) to the COM port on Freefly's MoVI Pro/XL line of gimbals. Provides power to the Receiver and data back to the gimbal. Length: ~20cm
€35.00
*
NODO XLR Power Cable
The XLR power cable allows the wheels to power off a block battery with ARRI pin out (pin 1 = GND, pin 2 = PWR). This is helpful for getting higher voltages into the Inertia Motors to simulate heavier wheel weights. Length: ~19m
€159.00
*
NODO P-Tap Power Cable
This standard power cable allows the wheels to power off a battery plate that can be mounted on the base of the wheels. One of these cables is included with every set of Inertia Wheels. Length: ~4,5m
€120.00
*
NODO Hardwire Cable
The 30m Hardwire Cable utilizes robust RS-485 signaling to allow users to bypass wireless for all gimbals and directly connect the wheels to the receiver. For jib, crane, car, or permanent installations, this enables interference-free...
€159.00
*
Freefly CCW Single Motor Propeller Set with...
This is a balanced counter-clockwise replacement prop set for a single motor, including the ActiveBlade hub, for booms 1 or 3. The ActiveBlade reduces the motor vibrations by 500%. This innovative solution to reduce vibrations increases...
€599.00
*
Freefly CW Single Motor Propeller Set with...
This is a balanced clockwise replacement prop set for a single motor, including the ActiveBlade hub, for booms 2 or 4. The ActiveBlade reduces the motor vibrations by 500%. This innovative solution to reduce vibrations increases the...
€599.00
*
Freefly Alta X 12S Flight Packs - 16AH (single)
Power your Alta X with the batteries in use, that fit perfectly! Recharge rapidly using an XT-90-capable LiPo battery charger, available separately. Each Alta X flight requires a pair of 12S batteries. Flight times will vary based on...
€899.00
*
Freefly CW Single Motor Propeller Set for Alta X
This pair of replacement clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 2 or 4. Props are supplied as a weight matched and balanced pair. Only fit props in the factory supplied...
€111.00
*
Freefly Alta X Case
Transport your Alta X all over the world in this tough hard case . The custom foam insert was designed and tested to keep your Alta X secure and safe, no matter how you ship or travel with it. Features: Tough Pelican Hardcase Built in...
€2,718.00
*
Freefly Skyview Landing Gear for Alta X
Skyview Landing Gear is used to mount the flight packs and provide a base to land the Alta X when the payload is top-mounted or you are not flying a MoVI Pro. Required for operation if not flying a Movi with its own landing gear, or for...
€1,020.00
*
Freefly Spare Parts Kit for Alta X
The Freefly Spare Parts Kit for Alta X is included with the purchase of every Alta X. It includes replacement wear-parts, fasteners and accessories for Alta X. In the Box Qty 3 - 10A Mini Blade Fuses Qty 4 - Replacement battery straps...
€90.00
*
Freefly CCW Single Motor Propeller Set for Alta X
This pair of replacement counter-clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 2 or 4. Props are supplied as a weight matched and balanced pair. Only fit props in the factory...
€111.00
*
Freefly Mōvi Ring Pro II
The Freefly Movi Ring Pro II is designed to allow users to create content more quickly and effectively than ever before. It features a built in stand for instant set down to allow users to rest between shots. The built in stand allows...
€999.00
*
Cartoni Focus 8
The Cartoni Focus 8 tripod system (75mm) was specially developed for quick and uncomplicated assembly. Ideally complemented by the built-in spreader and the swivelling rubber feet, the Focus 8 tripod system is characterized by...
From €665.00
*
Cartoni C20-S
The Cartoni C20-S tripod system (100mm) is designed to provide extremely stable support for standard EFP configurations. The C20-S tripod system is capable of working with a wide range of cameras weighing from 7 to 32kg (15 to 71lbs)....
From €5,675.00
*
Cartoni Focus 22
The Cartoni Focus 22 tripod system (100mm) was specially developed to support the many new ENG cameras, which are so compact yet fully equipped and feature the patented Cartoni "wing" continuously adjustable weight compensation. With its...
From €3,925.00
*
Cartoni Focus 18
The Cartoni Focus 18 tripod system (100mm) offers a wide range of advanced functions, including infinitely adjustable tension settings, a Euro-style quick-change camera plate and a switchable spirit level with light-emitting diode....
From €2,399.00
*
Cartoni Focus 12
The Cartoni Focus 12 tripod system (100mm) is the ideal support for the latest cameras weighing from 0 to 12kg (26lbs). The extremely compact and lightweight Focus 12 tripod system features an infinitely variable fluid damping system for...
From €1,195.00
*
Cartoni Focus HD
The Cartoni Focus HD tripod system (100mm) is designed for DSLR/UHD and ENG cameras with 100mm Bowl Base. The particularly compact and lightweight Focus HD features an infinitely variable fluid damping system for pan and tilt movements...
From €995.00
*
Freefly Normal Length Alta Spacer
This is a replacement Toad-In-The-Hole spacer for the Alta 6 and Alta 8. This has the same mounting as the original spacer and is a replacement part for the original unit. Recommended for Alta 6 and Alta 8 only. Features 1x TITH Spacer...
€104.00
*
Freefly FRX Pro
The Freefly FRX Pro is the next generation of wireless control for Movi Pro, Movi Carbon, and Movi XL. Its increased power and improved noise rejection give it unprecedented range while improvements to the binding process make it easy to...
€849.00
*
Wooden Camera Shoulder Rig v3
A major update to our popular Shoulder Rig at a lower cost! Now including a larger and more durable shoulder pad, lighter weight design, and an integrated kickstand for setting the rig down. Quick release shoulder rig based on ARRI...
From €536.45
*
Freefly 13mm to 15mm Double Clamp Mount
If you need to offset your 13mm mount, and adapt to a 15mm accessory, use this mount, with adjustable levers on each end. Handy for mounting accessories equipped with a 13mm Quick Release Plug (or the low profile version), to the top or...
€49.00
*
Freefly 13mm Double Clamp Mount
If you need to offset your 13mm mount, use this 13mm Double Clamp Mount with adjustable levers on each end. Pair this with any 13mm Adjustable Quick Release product for creative options to mount your accessories. Features Compatible with...
€49.00
*
Freefly 13mm Low Profile Mount
Similar to our standard 13mm Quick Release Plug, but much lower profile! Great for mounting monitors, transmitters, receivers and other ¼ 20 equipped gear in tight spaces! Features Lightweight and low profile design 13mm Aluminum Quick...
€12.00
*
Freefly 13mm Male to Female Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Movi. Use this 13mm Male to Female Right Angle Mount to connect a male and female 13mm adapter at a right angle! Features Compatible...
€24.00
*
Freelfy 13mm Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Movi. Use this Right Angle Mount to combine two adjustable 13mm adapters Features Compatible with all Freefly 13mm accessories mounts...
€24.00
*
Freefly 13mm to 13mm Mount
Benötigen Sie einen 13mm Spud-Adapter von einem male to male? Hier ist er! Merkmale Kompatibel mit allen Freefly 13mm Zubehörhalterungen Leichte Aluminiumkonstruktion Zwei 13-mm-Montagepunkte mit Innengewinde ¼ 20 für Flexibilität beim...
€17.00
*
Freefly 13mm Jog Mount
Need a little bit of extra room, a bit of extra clearance or an additional option for rotation with your 13mm mount? Use this offset adapter for 13mm male to 13mm female. Features Compatible with all Freefly 13mm accessories mounts...
€38.00
*
Steady movement due to camera sliders
A camera slider makes soft, judder free rides possible. It contains a slider which is mounted to the rail. The camera gets connected to the slider for steady camera rides on rails. There are also motor-operated Slider for cameras available – they are used if you want to avoid stutters caused by touching it. Video-slider are available in all sorts of sizes and configurations.
Gimbals for handmade tracking shots
Gimbals same as the MöVI products by freefly are based on a suspension, a bearing of two crossing, right-angled swiwels. In the past they were used on ships for vibration free, horizontal storage of the compass. Today it is the technical foundation the stabilizer. These gimbals make a gliding, steady handheld tracking shot possible.
Multicopters for lifting up cameras
Multicopters like the ones of freefly did revolutionize the movie industry in past years.
With them new perspectives and tracking shots are possible: Flyovers as well as filming flying objects and fast tracking shots. Also Multicopters are very compact and easy for transport and mounting. Usually you just need to attach weight and you’re good to go. Multicopters are making air images as dynamic, real and affordable as never before.