Blackmagic HyperDeck Studio HD Pro

Measuring one rack width, the HyperDeck Studio HD Pro offers all the features of the Plus model and more because it has room for extra features. The larger model has two SSD slots in addition to the two SD card slots of the smaller models. This allows your media to be used immediately for different HyperDeck Studio models. They have fancy transport buttons and a metal seeker with an electronic clutch that slows rotation in shuttle mode. Dedicated buttons let you determine the jog, shuttle, and scroll modes of the seeker. The extra space on the rear panel was used to upgrade the timecode connectors to XLR connectors.

Connectors

• SDI video inputs: 1
• SDI video outputs: 2
• SDI monitor outputs: 1
• SDI rates: 270 Mbit, 1.5 G, 3 G, 6 G
• HDMI 2.0 video inputs: 1
• HDMI 2.0 video outputs: 1
• Built-in speaker: 1 mono
• Audio output: 1 x 6.35 mm headphone jack
• Display: 2.2-inch LCD
• Timecode connectors: 1 XLR input, 1 XLR output
• Reference connections:
• 1 BNC input, 1 BNC output
• For tri-sync or black burst
• SDI audio inputs: 16 embedded audio channels
• SDI audio outputs: 16 embedded audio channels
• HDMI audio inputs: 8 embedded audio channels
• HDMI audio outputs: 8 embedded audio channels
• Remote control: 1 RS-422 input, 1 RS-422 output
• Recorder configuration: via user interface or Blackmagic HyperDeck Ethernet Protocol
• Ethernet: 1 Gbps
• Computer interface: 1 USB-C 3.0 (up to 5Gb/s) for recording to external drives, webcam output, software configuration and updates

Standards

• SD video standards: 525i/59.94 NTSC; 625i/50 PAL
• HD video standards:
• 720p/50; 720p/59.94; 720p/60
• 1080i/50; 1080i/59.94; 1080i/60
• 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60
• 1080PsF/23.98; 1080PsF/24; 1080PsF/25; 1080PsF/29.97; 1080PsF/30
• 2K DCI video standards: 2Kp/23.98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29.97 DCI; 2Kp/30 DCI
• Ultra HD video standards:
• 2160p/23.98; 2160p/24; 2160p/25;
• 2160p/29.97; 2160p/30
• 4K DCI video standards: 4Kp/23.98 DCI; 4Kp/24 DCI; 4Kp/25 DCI; 4Kp/29.97 DCI; 4Kp/30 DCI
• SDI compliance: SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M Level A and B, SMPTE 2081-1, SMPTE 2081-10, SMPTE 2084, and SMPTE 2108-1
• Supported SDI metadata: HD RP188 and Closed Captioning CEA-708. HDR metadata is supported via SDI.
• Supported HDMI formats:
• 525i/59.94 NTSC; 625i/50 PAL,
• 720p/50; 720p/59.94; 720p/60,
• 1080i/50; 1080i/59.94; 1080i/60,
• 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60,
• 2Kp/23.98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29.97 DCI; 2Kp/30 DCI,
• 2160p/23.98; 2160p/24; 2160p/25; 2160p/29.97, 2160p/30,
• 4Kp/23.98 DCI; 4Kp/24 DCI; 4Kp/25 DCI; 4Kp/29.97 DCI; 4Kp/30 DCI
• Audio sampling: standard television sampling rate of 48 kHz and 24 bits
• Video sampling frequency: 4:2:2 YUV
• Color accuracy: 10 bit
• Color spaces: Rec. 601, Rec. 709, Rec. 2020. 33-point 3D LUTs can be applied to SDI monitor output
• HDR support: Hybrid Log Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
• Multirate support: Automatic detection of SD, HD and 6G-SDI.
• Copy protection: No copy-protected HDMI sources can be recorded via the HDMI input. Always check copyright before recording or distributing content.

Controls

• Built-in control panel: 16 buttons, seek controller with electronic clutch, and 2.2-inch color display for transport and device control
• External control: RS-422 deck control, SDI start/stop, timecode run. With Blackmagic HyperDeck Ethernet Protocol Supports remote file uploads via FTP

Screens

• Built-in 2.2-inch LCD for monitoring video, audio and timecode, and menu settings
• LED light surrounds SSD bays and LED indicators above SD card bays

Power requirements

• Power supply:
• 1 integrated AC power supply for 100-240 V, 50/60 Hz
• 1 four-pin XLR socket for external 12V DC power supply or battery charging
• Power consumption: Maximum 100 watts

Included in delivery

• HyperDeck Studio HD Pro