Close filters
  •  
  •  
  •  
  •  
  •  
  •  
from to
No results were found for the filter!
Wooden Camera D-Box - URSA Mini, V-Mount
Wooden Camera D-Box - URSA Mini, V-Mount
The Wooden Camera D-Box (URSA Mini, V-Mount) is a custom version of the popular Wooden Camera D-Box. This includes power distribution, standardized remote start / stop and hot swap capabilities. The D-Box is attached by a Molex connector...
€895.00 *
Wooden Camera WC V-Mount
Wooden Camera WC V-Mount
The wooden camera V-mount plate based on an IDX V-mount. Features 2x D-Taps Unregulated 12V-16V Technical specifications Weight 234 g Dimensions 142.4 x 90.8 x 21.3 mm
€130.00 *
Wooden Camera Battery Slide
Wooden Camera Battery Slide
The Wooden Camera Battery Slide is an adjustable mounting system for WC V-mount, WC Goldmount, QRC Goldmount and Red / Blueshape Style battery plates. The many available holes are ideal for attaching additional accessories. With firm...
€199.00 *
IDX A-MT2V
IDX A-MT2V
The IDX A-MT2V is a V-mount adapter plate, which allows simple adaptation of the equipment to V-mount with a robust and secure connection. Characteristics Robust precision design for maximum locking and connectivity Equipped with...
€130.00 *
IDX AT-E2CMKII
IDX AT-E2CMKII
The IDX AT-E2CMKII V-Mount adapter allows the Canon C300 Mark II the power supply with an IDX ENDURA V-mount battery. Features 2x 50W D-Tap Outputs (unregulated) Can be mounted on the IDX A-CP (A), TA-CA2 or other standard mounting...
€185.00 *
IDX P-VS2PW
IDX P-VS2PW
Die IDX P-VS2PW V-Mount Adapterplatte ist die erweiterte Version von der IDX P-V2. Speziell konzipiert für Panasonic AJ-HPX3100. Sie ermöglicht das Ein- und Ausschalten des Kameralichtes synchron mit der Betätigung des Record-Buttons....
€166.00 *
IDX VL-DT1
IDX VL-DT1
The IDX VL-DT1 is a portable charger designed for batteries with D-Tap Advanced Port. The advanced 3-pin design supports and controls the charging. This increases the battery life. Characteristics: Single-channel D-Tap charger Three-pin...
€95.00 *
IDX P-V257
IDX P-V257
The IDX P-V257 converts 12V to 5V / 7.3V. The D-Tap connector is designed for use with regulated 5V / 7.3V power. Accessory accessories, can be supplied via the second unregulated 2-pole D-Tap on the opposite side of the plate. Features...
€180.00 *
IDX PV284
IDX PV284
The IDX P-V284 V-Plate has two double D-Taps. A 2-pin D-Tap serves as a 8.4V (regulated) connection and a second 2-pin D-Tap is suitable for the optional accessories. The unregulated output voltage can be 16.8V. Suitable for Sony HVR...
€202.00 *
IDX NH-202
IDX NH-202
The IDX NH-202 is a battery holder, which can be mounted directly on the back of the camera or on many radio receivers. Features D-tap (50W) Digi-View Technical specifications Dimensions: 97 (B) x 199 (H) x 85 (D) mm Weight: 370 grams
€360.00 *
IDX NH-204
IDX NH-204
The IDX NH-204 is a dual NP battery holder and can turn on board light or LCD monitor. The IDX NH-204 has a 4-pin XLR-DC output. Features 4pin XLR DC output (50W) Power supply for on-board lighting, LCD monitor and other accessories...
€383.00 *
IDX IA-200a
IDX IA-200a
The IDX IA-200a has a dual output with a universal AC 100 ~ 240V input with a 100W power supply. The two XLR outputs output the 100W in any combination of two channels or 100W from a single channel. A 4-pin XLR power supply cable is sold...
€388.00 *
IDX IA-60a
IDX IA-60a
The IDX IA-60a is a single 60W power supply with a universal AC100 ~ 240V input for worldwide operation. The IDX IA-60a power supply has a light, robust metal housing, an integrated carrying handle, an adjustable output voltage (12.5V -...
€228.00 *
IDX IA-300a
IDX IA-300a
The IDX IA-300a is a 210W power supply with a universal AC 100 ~ 240V input. It has three XLR outputs that can output 210W in any combination of one, two or three output channels. IDX IA-300a has adjustable output voltage and automatic...
€575.00 *
IDX CA-4XLR
IDX CA-4XLR
The IDX CA-4XLR is a high-quality 4-pin XLR M-F power cable. Features Cable length 3 m High quality connection from the accessory to the power supply
€47.00 *
IDX AC-100
IDX AC-100
The IDX AC-100 multifunctional power adapter, which can be mounted directly on a V-mount or separate power supply. The unit runs quietly at high loads with a temperature-controlled, low-noise fan. Characteristics V-mount connector that...
€300.00 *
IDX SD-1E
IDX SD-1E
The IDX SD-1E is a profile V-mount bracket that can be attached to any standard waist belt and supports up to two ENDURA batteries in PowerLink mode. Customers have the choice of simultaneous 7.2V (regulated) and / or 12V (unregulated)...
€310.00 *
IDX A-E2LCD-2
IDX A-E2LCD-2
The IDX A-E2LCD-2 is compatible with various LCD Monitors based on VESA 100. The LCD is powered by the 4-pin Pigtail XLR connector of the adapter. The compatibility of the LCD should be checked before use. Characteristics The A-E2LCD-2...
€330.00 *
IDX A-MWR
IDX A-MWR
The IDX A-MWR is attached directly to a V-mount camcorder without screws. Four different positions are adjustable; With PowerLink capability. Wireless receivers and hard drives can be attached to both sides of the plate. D-Tap connector...
€320.00 *
IDX TA-PV2USB
IDX TA-PV2USB
The IDX TA-PV2USB allows direct mounting of IDX ENDURA batteries. It is designed to ensure the power supply of the connected USB devices. The plate can be attached directly to the universal mounting plate IDX A-CP (A), TA-CA2 series or...
€198.00 *
IDX MD-NBV
IDX MD-NBV
The IDX MD-NBV is designed for use between a V-mount camera and the battery pack or directly mounted on a V-Dock. With five D-Taps, the IDX MD-NBV enables the power supply for additional accessories such as Onboard monitors, lights,...
€295.00 *
IDX TA-PV2J650
IDX TA-PV2J650
The IDX TA-PV2J650 is specially designed for use with the JVC GY-HM600 / GY-HM650 cameras. The IDX TA-PV2J650 is connected directly to the camera and is compatible with the IDX A-CP (A) universal mounting plate. Characteristics: Power...
€165.00 *
IDX A-E2EOSC
IDX A-E2EOSC
The new IDX A-E2EOSC enables the Canon Cinema EOS cameras C100, C300 and C500 to be powered by IDX ENDURA batteries. Characteristics: Supply the Canon Cinema EOS Series cameras via a breakout DC cable (please note that the plate is not...
€258.00 *
IDX C-EB (XLR)
IDX C-EB (XLR)
The IDX C-EB (XLR) is a small, compact power adapter that can be attached to any standard waist belt and supports up to two ENDURA batteries, including PowerLink mode. It can be used in many applications to provide supplementary...
€127.00 *
IDX ET-PV2UR
IDX ET-PV2UR
The IDX ET-PV2UR is connected directly to the Blackmagic URSA or Blackmagic URSA mini camera. These can then be supplied with IDX ENDURA lithium ion batteries. Characteristics: Allows direct mounting of IDX ENDURA batteries on the back...
€112.00 *
IDX A-AB2E
IDX A-AB2E
The IDX A-AB2E can be mounted temporarily or transitionally to 3-bolt mounting plates. The adapter allows the use of ENDURA batteries on 3-bolt mounting systems. The use of the Digi-View is disabled when using the IDX A-AB2E....
€142.00 *
IDX A-NH2E
IDX A-NH2E
The IDX A-NH2E is a V-mount adapter which allows to attach equipment to V-mount. Characteristics V-mount (male) adapter plate (internal mounting screw holes) Equipped with Digital-View Data Connections: Digital battery capacity data from...
€67.00 *
IDX A-CP(A)
IDX A-CP(A)
The IDX A-CP (A) is an aluminum cheese plate and clamp. The cheese plate allows to mount the IDX V-Mount P-V2 series in different positions. Characteristics: Versatile aluminum cheese plate designed for mounting on all IDX V-Mount series...
€127.00 *
IDX NBV-XLR
IDX NBV-XLR
The design is mountable on any V-mount plate. The IDX NBV-XLR has a 4-pin XLR. With the IDX NBV-XLR, you can power your device from a large 12V battery pack or 12V AC. With the D-Tap it is also possible to supply additional accessories....
€127.00 *
IDX BCC-CP(A)
IDX BCC-CP(A)
Bundle with1 x ET-PV2BM V-Mount adapter and with 1 x A-CP(A). The IDX ET-PV2BM is a V-Mount adapter for the Blackmagic Cinema camera which allows direct mounting of IDX ENDURA batteries and is designed to be mounted directly to the IDX...
€221.00 *
IDX V212
IDX V212
As a variant of the popular IDX P-V2 series, the IDX P-V212 offers a 12VDC output and includes two D-Taps - one on each side. First is a 2-pin D-tap for regulated 12VDC output and the second D-Tap is unregulated for lights, HDD recorders...
€168.00 *
IDX P-VS2
IDX P-VS2
The IDX P-VS2 V-Mount adapter plate is the expanded version of the IDX P-V2. It allows you to switch the camera light on and off synchronously with the operation of the Record button. The plate has several mounting holes, which can be...
€108.00 *
IDX P-V2
IDX P-V2
The IDX P-V2 V-Mount adapter plate allows most cameras to be equipped with a V-mount battery interface. The plate has several mounting holes, which can be attached to almost all professional video cameras. The P-V2 has a 2-pole D-tap,...
€93.00 *
IDX VL-PVC1-DC
IDX VL-PVC1-DC
With the compact IDX VL-PVC1 you are flexible and mobile. This allows the accessories to be reloaded while in use. The V-plate works with all 12V IDX Endura system batteries. The IDX VL-PVC 1-DC has a DC adapter for your car. Features:...
€198.00 *
IDX VL-PVC1
IDX VL-PVC1
With the compact IDX VL-PVC1 you are flexible and mobile. This allows the accessories to be reloaded while in use. The V-plate works with all 12V IDX Endura system batteries. Features: Single-channel portable charger Small size - ideal...
€187.00 *
IDX A-E2NP
IDX A-E2NP
The IDX A-E2NP is an adapter for charging NP batteries (Li-Ion / Ni-Cd) suitable for ENDURA V-Mount charger. Features: Allows charging of NP batteries to ENDURA V-mount chargers Fits all ENDURA chargers High quality components ensure...
€198.00 *
1 From 3