The following products have been found matching your search "Accessory cable for RobyHead D": 136
Or did you mean:
Data Cables for the MōVI M5 M1
|
Data Cables for the MōVI M5 M1
|
Sunhood Cage combo for 703 Ult
|
hdmi type d to hdmi type a
|
Toad on a Stick for Movi pro
|
Mattebox Kit 450W for Sony PXW
|
freefly cable
|
wooden camera d tap
We have many more products and manufacturers that are not listed in our shop yet. If you can not find your wished product below, please ask us!
No results were found for the filter!
Freefly MōVI Controller to Wheel Cable
MoVI Controller to Wheel Cable - Durable overmolded cable, used to connect MoVI Wheels to MoVI Controller. (500mm Length)
€110.00
*
Freefly CAN Cable (250mm)
Freefly CAN Cable (250mm) - Durable overmolded cable, used for chaining MoVI Wheels. (250mm Length)
€27.00
*
NODO Hardwire Cable
The 30m Hardwire Cable utilizes robust RS-485 signaling to allow users to bypass wireless for all gimbals and directly connect the wheels to the receiver. For jib, crane, car, or permanent installations, this enables interference-free...
€159.00
*
NODO P-Tap Power Cable
This standard power cable allows the wheels to power off a battery plate that can be mounted on the base of the wheels. One of these cables is included with every set of Inertia Wheels.
Length: ~4,5m
€120.00
*
NODO XLR Power Cable
The XLR power cable allows the wheels to power off a block battery with ARRI pin out (pin 1 = GND, pin 2 = PWR). This is helpful for getting higher voltages into the Inertia Motors to simulate heavier wheel weights.
Length: ~19m
€159.00
*
Freefly Movi Pro / XL Phantom Start/Stop Cable...
This cable allows Movi Pro / XL users to access the Vision Research Start / Stop command protocol. This allows users to start and stop camera recording from up to 182m away using the Movi Controller, MIMIC, Pilot or compatible Freefly...
€330.00
*
Freefly Movi Pro Wave Remote Control Cable
Connect your Wave camera to the Movi Pro and trigger start/stop record from any supported Freefly ecosystem controller (Mōvi Controller, MIMIC or Pilot).
Features
Connector A: Molex Microfit
Connector B: JST GH 6PIN
High flex,...
€20.00
*
Freefly Toad in the Hole M3 Quick Release...
The Toad in the Hole M3 Quick Release Receiver is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi*. It attaches to the pan (upper) motor of any Movi and allows the...
€270.00
*
Freefly Lightweight Standard to Standard Video...
Freefly Lightweight Standard to Standard Video Cable (3m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€49.00
*
Freefly Lightweight Mini to Standard Video...
Freefly Lightweight Mini to Standard Video Cable (.7m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€38.00
*
Freefly Lightweight Mini to Standard Video...
Freefly Lightweight Mini to Standard Video Cable (1.5m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€38.00
*
Blackmagic DeckLink 4K/HD Extreme 3 Breakout Cable
DeckLink 4K/HD Extreme 3 breakout cable
€119.53
*
€125.82
*
Lupo Light Battery Charger for Lupo Batteries...
Battery charger for Lupo batteries
This charger works with Lupo 95 Wh and 160 Wh batteries. The same charger can be used to charge all batteries recommended for use with the Lupo range of models.
€105.91
*
Lupo Light DMX Cable (119)
Lupo Light DMX Cable is a shielded cable with two 5-pole XLR connectors to connect DMX devices. The cable is supplied in the standard length of 4m.
€38.00
*
Blackmagic Universal Videohub Remote Cable
Remote Control Cable for Universal Videohub
If you need remote control on your Universal Videoub use this cable to add four independent remote control ports to either the BNC SDI or optical fiber SDI interfaces.
Build your own 3...
€69.52
*
Litepanels RJ45 to 5-Pin XLR (Male) Conversion...
RJ45 Ethernet to 5-Pin XLR Male Adapter Cable
Conversion cable to convert DMX from 5-pin XLR to RJ-45 Ethernet
€66.30
*
Lupo Light Padded Bag for LED Panels (274)
With Lupo padded bags for LED panels you can take your Lupoled or Superpanel fixtures wherever you like. With each bag you can carry two LED panels of any model and there is space left for some of your other accessories.
€89.00
*
Lupo Light Diffusor for Lupoled (277)
The diffuser is an inexpensive and practical accessory that fits all models of the Lupoled range. You can attach it to the fixture in a matter of seconds and with it you can have an even softer and more diffused beam of light, without...
€32.00
*
Lupo Light Barndoor for Lupoled (279)
The barndoors are a practical and ideal accessory that allows you to have a total control on the beam of light of the fixture. With them you can shape the light in total freedom. Very easy to attach to the main body of the fixture,...
€119.00
*
Lupo Light Diffusor for Superpanel (422)
The diffuser is an inexpensive and practical accessory that fits all models of the Superpanel range. You can attach it to the fixture in a matter of seconds and with it you can have an even softer and more diffused beam of light,...
€34.00
*
Lupo Light Padded Bag for Superpanel 60 (434)
With the padded bag for Superpanel 60 you can take your kit wherever you like. With each bag you can carry one model of the Superpanel 60 range and there is space left for some of your other accessories. Made in Italy like all other...
€462.91
*
Lupo Light Bag Padded for DAYLED (314)
With the padded bag you can take your Fresnels anywhere. It can hold a Dayled 650 (with barndoors) or a Dayled 1000 (with barndoors) or a Dayled 2000 (without barndoors). It is also suitable for our HMI Fresnels: Daylight 400 (with...
€98.00
*
Lupo Light Barndoor for Superpanel (423)
The barndoors are a practical and ideal accessory that allows you to have a total control on the beam of light of the fixture. With them you can shape the light in total freedom. Very easy to attach to the main body of the fixture,...
€119.00
*
Lupo Light Softbox for Superpanel (425)
The softbox is an ideal accessory to make the light beam soft and completely uniform. It can be fixed on the body of the Superpanel models in a few seconds and does not require other accessories. Made with care in all details, it is a...
€249.00
*
Lupo Light Clamp for Fixtures (144)
Die-cast aluminium clamp painted black with 16 mm (5/8") hex seat and 1/4" and M6 threads. Complete with flat adapter. The clamp weighs 0.5 kg (1.1 lb) and has a maximum load of 15 kg (33 lb). It can be adapted to fit tubes with a...
€59.00
*
Lupo Light Egg Crate for Softbox (426)
The egg crate grid can be used with the softbox for LED Fresnels (Dayled 650, Dayled 1000 and Dayled 2000) and with the softbox for Superpanels. The egg crate grid is an important and professional accessory that gives you complete...
€229.00
*
Lupo Light Barndoor for Superpanel 60 (431)
The barndoors are a practical and ideal accessory that allows you to have a total control on the beam of light of the fixture. With them you can shape the light in total freedom. Very easy to attach to the main body of the fixture,...
€219.00
*
Lupo Light Softbox for Superpanel 60 (432)
The softbox is an ideal accessory to make the light beam soft and completely uniform. It can be fixed on the body of the Superpanel models in a few seconds and does not require other accessories. Made with care in all details, it is a...
€449.00
*
Lupo Light V-Mount Plate for Superpanel (420)
The V-Mount battery plate is an essential accessory for lithium battery-powered equipment. It accepts all standard V-Mount batteries. The plate incorporates a D-Tap output socket for the power lead (4-pole XLR) which is connected to the...
€74.00
*
Lupo Light V-Mount Plate for Lupoled (270)
The V-Mount battery plate is an essential accessory for lithium battery-powered equipment. It accepts all standard V-Mount batteries. The plate incorporates a D-Tap output socket for the power lead which is connected to the back of the...
€74.00
*
Lupo Light Bag Padded for Starlight and...
With Lupo padded bags for Starlight and Quadrilight you can carry your fixtures wherever you like. Practical and robust this bag will last in years and will protect your Lupo fluorescent lights when used outside the studio.
€43.00
*
Lupo Light Egg Crate for Superpanel Soft (427)
This egg crate grid can be used with all Superpanel Soft models and with the Superpanel Full Color 30 and it is mounted in front of the diffuser panel of the fixture. This accessory should not be confused with the Egg crate grid for...
€229.00
*
Lupo Light Egg Crate for Softbox Superpanel 60...
The egg crate grid can be used with the softbox for Superpanel 60 models and it is an important and professional accessory that gives you complete control of the light beam. It only takes a few seconds to attach this robust,...
€349.00
*
Lupo Light Pole Operated Yoke for Superpanel (424)
The functioning of the Superpanel pole operated yoke is effective and reliable over time. All models with pole operated yoke are supplied with a 28 mm spigot (16 mm is also available).
€298.00
*
Freefly Spare Parts Kit for Alta X
The Freefly Spare Parts Kit for Alta X is included with the purchase of every Alta X. It includes replacement wear-parts, fasteners and accessories for Alta X.
In the Box
Qty 3 - 10A Mini Blade Fuses
Qty 4 - Replacement battery...
€90.00
*
Freefly CW Single Motor Propeller Set for Alta X
This pair of replacement clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 2 or 4.
Props are supplied as a weight matched and balanced pair. Only fit props in the factory...
€111.00
*