The following products have been found matching your search "Freefly MoVI XL Wiring Harness": 156
Or did you mean:
movi
|
Freefly MōVI Pro L
|
Freefly MōVI Pro L
|
MōVI Pro XL Camera Mounting
|
MōVI Pro XL Camera Mounting
|
MōVI M10 Full Cage Kit
|
MōVI XL to Mitchell Adapter
|
MōVI XL to Mitchell Adapter
We have many more products and manufacturers that are not listed in our shop yet. If you can not find your wished product below, please ask us!
No results were found for the filter!
Freefly MōVI Ring Pro Replacement Feet
Freefly MōVI Ring Pro Replacement Feet
The Replacement Feet kit includes a set of rugged plastic upper & lower clamps and hardware needed to replace broken or worn MōVI Ring Pro feet. Note - these feet are compatible with...
€30.00
*
Freefly XL Lens Support
XL lens support allows users to rigidly tie the lens into the dovetail plate. This helps to ensure adequate performance with lenses that are sloppy/lack rigidity. The lens support mounts to the 19mm rods and features adjustable lens...
€255.00
*
Freefly MōVI Pro Spare Parts Kit
This MoVI Pro Spare Parts Kit is designed to provide an assortment of items that are useful for maintaining your MoVI Pro in the field.
Includes:
Qty 4 - Hinge M3 Nylock
Qty 4 - Hinge Quick Release Lever
Qty 3 - Quick...
€50.00
*
Freelfy MōVI Pro / XL Camera Mounting Screws
Freelfy MoVI Pro / XL Camera Mounting Screws : Selection of screws for mounting MoVI (Pro or XL) camera plates/rails to a variety of cameras.
Specs:
Stainless Steel
Flat Head Screws and Socket Head Cap Screws
Includes:...
€17.00
*
Freefly Movi Counterweight Thumbscrews
If you lose one of your thumbscrews for the Movi Adjustable Counterweight, or want backups, this is the kit you need! Includes the thumbscrews for attaching the Counterweight to the Movi, as well as the thumbscrews to hold the weights...
€9.00
*
Freefly MoVI Pro Pan Mount Upgrade
MoVI Pro Pan Mount Upgrade - This is an aluminum MoVI Pro pan mount upgrade that replaces the original carbon fiber mount to increase the strength for high force applications (car mount, cable cam use, nose mounting, etc).
Includes:...
€17.00
*
Freefly MōVI Pro Camera Top Handle
With the MoVI Pro Camera Top Handle you can go from MoVI to handheld in seconds! Just release the camera from the MoVI, slip the Top Handle onto the top plate and start shooting handheld.
Features:
Familiar 25mm tube handle from...
€230.00
*
Freefly MōVI Pro Spare Grip Disk Kit
Replacement handstops for MoVI Ring Pro (30mm). Made with soft, grippy rubber on one side and smooth plastic on the other side, you can install them to suit your preference.
Includes:
2 sets of hand stops
4 M3x6 SHCS
€39.00
*
Freefly MoVI Pro Velocity Kit
The Velocity Kit was developed to help you aerodynamically balance your MoVI Pro, for increased performance in high-speed applications.
If you are operating the MoVI Pro mounted to a vehicle, or are otherwise exposing the MoVI to side...
€84.00
*
Freefly MōVI Controller to Wheel Cable
MoVI Controller to Wheel Cable - Durable overmolded cable, used to connect MoVI Wheels to MoVI Controller. (500mm Length)
€110.00
*
Freefly Mōvi Ring Pro II
The Freefly Movi Ring Pro II is designed to allow users to create content more quickly and effectively than ever before. It features a built in stand for instant set down to allow users to rest between shots. The built in stand allows...
€999.00
*
Freefly Movi Pro to TB50/TB55 Battery Adapter
For users needing longer runtime than the stock Movi Pro/Movi Carbon batteries, these adapters will allow you to use DJI TB50 and TB55 batteries. This is also useful for people using DJI Drones if they are traveling and only want to...
€439.00
*
Freefly Movi Pro Wave Remote Control Cable
Connect your Wave camera to the Movi Pro and trigger start/stop record from any supported Freefly ecosystem controller (Mōvi Controller, MIMIC or Pilot).
Features
Connector A: Molex Microfit
Connector B: JST GH 6PIN
High flex,...
€20.00
*
Freefly Extra Movi Counterweights
Balance and tuning are key to ensuring Movi’s best performance! Tuning is adjusted in the Movi app, but balance is achieved by physical adjustment.
In some cases, achieving balance can mean adding additional weight to one or more...
€34.00
*
Freefly Toad in the Hole M3 Quick Release...
The Toad in the Hole M3 Quick Release Receiver is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi*. It attaches to the pan (upper) motor of any Movi and allows the...
€270.00
*
Freefly MōVI Pro Adjustable Camera Plate
MōVI Pro Adjustable Camera Plate
Lightweight camera plate for the MoVI Pro. The adjustable camera plate features multiple 1/4-20 sized holes and a 3/8" slot to allow mounting a variety of camera shapes and sizes. Specs:...
€91.00
*
Freefly Battery to D-tap Connector
Ultra lightweight and flexible silicone cable to adapt a Freefly Aux battery pack to a female d-tap connector. Useful for powering any accessories that utilize a D-tap connector.
This cable will pass...
€33.00
*
Freefly Battery to 2 Pin Lemo
Ultra-lightweight and flexible silicone cable to adapt a Freefly Aux Battery pack to a 2 pin lemo connector. Useful for powering a variety of accessories like follow focus, wireless, etc.
This cable will pass...
€70.00
*
Freefly MoVI Firmware Recovery Jumper
The MōVI Firmware Recovery Jumper allows for users to recover from an unsuccessful firmware update. It allows the MōVI to start up in boot-loader mode, in the event that the firmware process has been interrupted.
€4.00
*
Freefly Toad (Male Adapter)
Purchasing an additional Toad (male adapter) allows for a MōVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of...
€90.00
*
Toad In The Hole Quick Release
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your MōVI. It allows the operator to remove the MōVI from the handle assembly and...
€330.00
*
Carbon V-lock Adapter Kit for RED EPIC
This V-Lock adapter kit for for the RED EPIC allows MōVI customers to use small V-Lock batteries to extend the run time on their RED EPIC, as well as provide D-tap power for 12V and 14.8V accessories (follow focus, wireless, etc.)...
€260.00
*
Freefly GPS Maxtenna
This high-performance helical antenna is helpful for shooting conditions where the GPS sky view is degraded (under a multi-rotor, in an urban environment, under foliage). It allows for better GPS lock and accuracy which allows the...
€70.00
*
Mōvi Pro Essentials Bundle (SL4)
Sonderpreis* Nur begrenzte Anzahl verfügbar!
Special price* Only a limited number available!
This is the most advanced camera movement system ever created. It offers industry leading performance, flexibility, and ease of use....
€7,695.00
*
Mōvi Pro Essentials Bundle + Travel Case (SL4)
This is the most advanced camera movement system ever created. It offers industry leading performance, flexibility, and ease of use. And it's now shipping with SL4 batteries!
Mōvi Pro is a lightweight, flexible and portable...
€8,450.00
*
Freefly Quick Release Kit
MoVI XL quick release kit allows users to quickly mount / dismount the gimbal from a variety of platforms. The male portion of the quick release mounts to MoVI XL, and the female portion mounts to whatever platform you intend to mount...
€550.00
*
Freefly FRX Pro
The Freefly FRX Pro is the next generation of wireless control for Movi Pro, Movi Carbon, and Movi XL. Its increased power and improved noise rejection give it unprecedented range while improvements to the binding process make it easy...
€849.00
*
Freefly MIMIC with Handlebars
Freefly MIMIC with Handlebars
The Freely MIMIC offers precise and natural control of the MoVI Pro / XL . Using Freefly’s innovative MIMIC technology, the camera automatically and intuitively follows users movements. MIMIC...
From €975.00
*
Freefly DTAP to Connex Transmitter Power Cable
This Cable allows users to power their Connex wireless system from one of the accessory ports on the MōVI Pro. It allows seamless integration and powering of the Connex wireless system onto either the pan bars or tilt cage.
Features...
€28.00
*
Freefly Lightweight Video Cable (0.75m)
The Freefly Lightweight HDMI (Type A) to HDMI (Type A) Cable is designed to send an HDMI signal from the camera to a monitor on the MoVI's top handlebar without the stiffness and weight of a traditional HDMI cable.
Length: 30"/ 76.2cm
€27.00
*
Freefly Bush Pilot
Bush Pilot is a compact knob that quick releases to the MIMIC.
It gives users the ability to control Focus, Iris, or Zoom on MoVI Pro . Users can quickly change between axis of control via the MIMIC screen. Bush Pilot is the...
€310.00
*
Freefly Adjustable Monitor Mount Quick Release
MoVI users like to customize and modify their rigs for their specific applications. Add this adjustable monitor mount to any 25mm tube (like the handlebars of your MoVI), to get your monitor right where you need it without the need for...
From €140.00
*
Freefly CAN Cable (250mm)
Freefly CAN Cable (250mm) - Durable overmolded cable, used for chaining MoVI Wheels. (250mm Length)
€27.00
*
Freefly USB Type C to Micro B Cable
USB Type C to Micro B Cable
This cable allows users to power any item that uses a USB Micro B connector from the MōVI Pro camera stage. We use it to power A7s(r)2 series cameras for extended run time.
Features
Connector A:...
€14.00
*
Freefly USB Type C to Type A Cable
USB Type C to Type A Cable
This cable allows users to charge their MIMIC controller’s internal battery via the USB C port. It can plug into any USB power supply, or any standard USB connector
Features
Connector A: USB A...
€20.00
*
Freefly Pop-N-Lock 30mm Quick Release
Pop-N-Lock 30mm Quick Release
MōVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 30mm, 25mm, and 15mm carbon tubes. We have created the Pop-N-Lock...
€110.00
*