The following products have been found matching your search "Freefly MoVI XL to Mitchell Ad": 170
Or did you mean:
movi
|
Freefly MōVI Pro L
|
Freefly MōVI Pro L
|
MōVI Pro XL Camera Mounting
|
MōVI Pro XL Camera Mounting
|
MōVI M10 Full Cage Kit
|
MōVI XL to Mitchell Adapter
|
MōVI XL to Mitchell Adapter
We have many more products and manufacturers that are not listed in our shop yet. If you can not find your wished product below, please ask us!
No results were found for the filter!
Freefly Battery to D-tap Connector
Ultra lightweight and flexible silicone cable to adapt a Freefly Aux battery pack to a female d-tap connector. Useful for powering any accessories that utilize a D-tap connector.
This cable will pass...
€33.00
*
Freefly Battery to 2 Pin Lemo
Ultra-lightweight and flexible silicone cable to adapt a Freefly Aux Battery pack to a 2 pin lemo connector. Useful for powering a variety of accessories like follow focus, wireless, etc.
This cable will pass...
€70.00
*
Freefly MōVI Pro Classic Handle
MoVI Pro Classic Handle
MoVI Classic handle allows users to operate MoVI Pro with a handle similar to the ones used on the original MōVI. This handle enables super low shots, or shots which require a smaller operating footprint (car...
€400.00
*
Freefly MōVI Pro Low Profile Handle
MoVI Pro Low Profile Handle
Inspired by Ty Evan’s custom M15 top handle used in the film “We Are Blood”, this low profile handle is the smallest, lightest, and most agile handle offering available. It allows for the ultimate in...
€240.00
*
Freefly MōVI Pro Landing Gear
MoVI Pro Landing Gear
This landing gear kit allows users to quickly add lightweight, robust, and aerodynamic landing gear to the MoVI Pro for use with the Freefly ALTA. The landing gear attaches in under 5 minutes and features a...
€390.00
*
Freefly USB Type C to Micro B Cable
USB Type C to Micro B Cable
This cable allows users to power any item that uses a USB Micro B connector from the MōVI Pro camera stage. We use it to power A7s(r)2 series cameras for extended run time.
Features
Connector A:...
€14.00
*
Freefly USB Type C to Type A Cable
USB Type C to Type A Cable
This cable allows users to charge their MIMIC controller’s internal battery via the USB C port. It can plug into any USB power supply, or any standard USB connector
Features
Connector A: USB A...
€20.00
*
Freefly MōVI Ring Pro Replacement Feet
Freefly MōVI Ring Pro Replacement Feet
The Replacement Feet kit includes a set of rugged plastic upper & lower clamps and hardware needed to replace broken or worn MōVI Ring Pro feet. Note - these feet are compatible with...
€30.00
*
Freefly XL Lens Support
XL lens support allows users to rigidly tie the lens into the dovetail plate. This helps to ensure adequate performance with lenses that are sloppy/lack rigidity. The lens support mounts to the 19mm rods and features adjustable lens...
€255.00
*
Freefly MōVI Pro Spare Parts Kit
This MoVI Pro Spare Parts Kit is designed to provide an assortment of items that are useful for maintaining your MoVI Pro in the field.
Includes:
Qty 4 - Hinge M3 Nylock
Qty 4 - Hinge Quick Release Lever
Qty 3 - Quick...
€50.00
*
Freefly USB Type C to Type C
This cable allows users to charge their Movi faster than is possible with traditional USB-A cable.
Features
Connector A: USB C
Connector B: USB C
1m (39in) cable length
€11.00
*
Freelfy MōVI Pro / XL Camera Mounting Screws
Freelfy MoVI Pro / XL Camera Mounting Screws : Selection of screws for mounting MoVI (Pro or XL) camera plates/rails to a variety of cameras.
Specs:
Stainless Steel
Flat Head Screws and Socket Head Cap Screws
Includes:...
€17.00
*
Freefly Movi Counterweight Thumbscrews
If you lose one of your thumbscrews for the Movi Adjustable Counterweight, or want backups, this is the kit you need! Includes the thumbscrews for attaching the Counterweight to the Movi, as well as the thumbscrews to hold the weights...
€9.00
*
Freefly Wheel to MIMIC Cable
The Freefly Wheel to MIMIC Cable is a durable overmolded cable, used to connect MIMIC to MoVI Wheels.
Connector A: 6 pin Molex Microfit
Connector B: Locking GH connector
300mm (11.81") cable length
€27.00
*
Freefly USB 2.0 to A Cable - M/M USB Cable- 1m
The Freefly USB 2.0 to A Cable - M/M USB Cable- 1m is a USB 2.0 cable used to connect your MoVI Controller to your USB A equipped computer for firmware updates.
Specs:
Connector A: USB A - Male
Connector B: USB A - Male
1m...
€15.00
*
Freefly MoVI Pro Pan Mount Upgrade
MoVI Pro Pan Mount Upgrade - This is an aluminum MoVI Pro pan mount upgrade that replaces the original carbon fiber mount to increase the strength for high force applications (car mount, cable cam use, nose mounting, etc).
Includes:...
€17.00
*
Freefly MōVI Pro Camera Top Handle
With the MoVI Pro Camera Top Handle you can go from MoVI to handheld in seconds! Just release the camera from the MoVI, slip the Top Handle onto the top plate and start shooting handheld.
Features:
Familiar 25mm tube handle from...
€230.00
*
Freefly 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette...
€158.00
*
Freefly 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 30mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette...
€158.00
*
Freefly Offset 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is parallel to tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette...
€139.00
*
Freefly Offset 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to the MōVI Ring Pro (30mm tube). Rosette is parallel to the tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette hardware
Quick release clamp
€158.00
*
Freefly MōVI Pro Spare Grip Disk Kit
Replacement handstops for MoVI Ring Pro (30mm). Made with soft, grippy rubber on one side and smooth plastic on the other side, you can install them to suit your preference.
Includes:
2 sets of hand stops
4 M3x6 SHCS
€39.00
*
Freefly MoVI Pro Velocity Kit
The Velocity Kit was developed to help you aerodynamically balance your MoVI Pro, for increased performance in high-speed applications.
If you are operating the MoVI Pro mounted to a vehicle, or are otherwise exposing the MoVI to side...
€84.00
*
Freefly 13mm to 13mm Mount
Benötigen Sie einen 13mm Spud-Adapter von einem male to male? Hier ist er!
Merkmale
Kompatibel mit allen Freefly 13mm Zubehörhalterungen
Leichte Aluminiumkonstruktion
Zwei 13-mm-Montagepunkte mit Innengewinde ¼ 20 für...
€17.00
*
Freefly 13mm Male to Female Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Movi. Use this 13mm Male to Female Right Angle Mount to connect a male and female 13mm adapter at a right angle!
Features...
€24.00
*
Freefly 13mm to 15mm Double Clamp Mount
If you need to offset your 13mm mount, and adapt to a 15mm accessory, use this mount, with adjustable levers on each end.
Handy for mounting accessories equipped with a 13mm Quick Release Plug (or the low profile version), to the top...
€49.00
*
Freefly Mōvi Ring Pro II
The Freefly Movi Ring Pro II is designed to allow users to create content more quickly and effectively than ever before. It features a built in stand for instant set down to allow users to rest between shots. The built in stand allows...
€999.00
*
Freefly Movi Pro Wave Remote Control Cable
Connect your Wave camera to the Movi Pro and trigger start/stop record from any supported Freefly ecosystem controller (Mōvi Controller, MIMIC or Pilot).
Features
Connector A: Molex Microfit
Connector B: JST GH 6PIN
High flex,...
€20.00
*
Freefly Lightweight Standard to Standard Video...
Freefly Lightweight Standard to Standard Video Cable (3m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€49.00
*
Freefly Lightweight Mini to Standard Video...
Freefly Lightweight Mini to Standard Video Cable (.7m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€38.00
*
Freefly Lightweight Mini to Standard Video...
Freefly Lightweight Mini to Standard Video Cable (1.5m) - This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a standard full connector (A) without the stiffness and weight of a...
€38.00
*
Freefly USB - Mini B (Male) to Mini B (Male)
USB Mini B (male) to Mini B (male) cable
Ultra lightweight and flexible USB mini B male to USB mini B male cable. This custom cable allows you to power your Paralinx or Teradek transmitter straight off the Mini USB port found on the...
€12.00
*
Freefly Extra Movi Counterweights
Balance and tuning are key to ensuring Movi’s best performance! Tuning is adjusted in the Movi app, but balance is achieved by physical adjustment.
In some cases, achieving balance can mean adding additional weight to one or more...
€34.00
*
Freefly 12V DC to DC Regulator for Alta X
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 12V accessories from the main batteries.
Features
XT30 Female connector for powering accessories
Pulls power from flight packs to...
€310.00
*
Freefly 5V DC to DC Regulator for Alta X
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 5V accessories from the main batteries.
Features
XT30 Female connector for powering accessories
Pulls power from flight packs to...
€316.00
*