No results were found for the filter!
Freefly USB 2.0 to A Cable - M/M USB Cable- 1m
The Freefly USB 2.0 to A Cable - M/M USB Cable- 1m is a USB 2.0 cable used to connect your MoVI Controller to your USB A equipped computer for firmware updates. Specs: Connector A: USB A - Male Connector B: USB A - Male 1m cable length
€15.00
*
IDEA VISION Hybris
The IDEA VISION´s Hybris is custom designed to reduce high and low frequency vibrations and hard impact shocks typically experienced when shooting from moving platforms on rough terrain or paved roads. The front mount can be set for...
€4,800.00
*
Freefly MōVI Controller to Wheel Cable
MoVI Controller to Wheel Cable - Durable overmolded cable, used to connect MoVI Wheels to MoVI Controller. (500mm Length)
€110.00
*
Freefly Quick Release 25mm post
Freefly Quick Release 25mm post - Bobbins are used to mount the wheels and MoVI Controller to the included cheeseplate, tripods, or anywhere with a 1/4" hole.
€37.00
*
Freefly CAN Cable (250mm)
Freefly CAN Cable (250mm) - Durable overmolded cable, used for chaining MoVI Wheels. (250mm Length)
€27.00
*
Freefly Brass Wheel
Freefly Brass Wheel - Optional Brass wheels for increased inertia and optimal precision and performance.
€549.00
*
Freefly Extra Movi Counterweights
Balance and tuning are key to ensuring Movi’s best performance! Tuning is adjusted in the Movi app, but balance is achieved by physical adjustment. In some cases, achieving balance can mean adding additional weight to one or more axis....
€34.00
*
Freefly Movi Counterweight Thumbscrews
If you lose one of your thumbscrews for the Movi Adjustable Counterweight, or want backups, this is the kit you need! Includes the thumbscrews for attaching the Counterweight to the Movi, as well as the thumbscrews to hold the weights in...
€9.00
*
Freelfy MōVI Pro / XL Camera Mounting Screws
Freelfy MoVI Pro / XL Camera Mounting Screws : Selection of screws for mounting MoVI (Pro or XL) camera plates/rails to a variety of cameras. Specs: Stainless Steel Flat Head Screws and Socket Head Cap Screws Includes: Qty 8 - Bolt M4 x...
€17.00
*
Peak Design Everyday Sling 5L
The 5L Everyday Sling from Peak Design is the perfect choice for carrying Movi and all your accessories for filmmaking on the go! FlexFold dividers allow instantly customizable organization and protection of your gear, with plenty of...
€64.70
*
€92.43
*
Junk in the Trunk
Lighter is better, but when the shot needs a bigger lens (or extra lens motors, matte box, etc) than you can balance on the MoVI Pro with standard hardware, you need to add counterweight to the back of the payload. With the Junk in the...
€400.00
*
Freefly Large Counterweight Set
These are the large weights that come included with the MoVI Pro Junk in the Trunk and are not compatible with Movi Adjustable Counterweight. They use a standard ¼ 20 thread, on top and bottom. With many mounting points on the plate and...
€97.00
*
Freefly Small Counterweight Set
These are the small weights that come included with the MoVI Pro Junk in the Trunk and not compatible with Movi Adjustable Counterweight. These use a standard ¼ 20 thread, on top and bottom. With many mounting points on the plate and...
€71.00
*
Freefly MoVI Pro Velocity Kit
The Velocity Kit was developed to help you aerodynamically balance your MoVI Pro, for increased performance in high-speed applications. If you are operating the MoVI Pro mounted to a vehicle, or are otherwise exposing the MoVI to side...
€84.00
*
Freefly Hex Driver
Keep your Freefly MōVI or ALTA properly tuned with the ergonomic, high-torque hex drivers.
€13.00
*
Freefly USB Type C to Type C
This cable allows users to charge their Movi faster than is possible with traditional USB-A cable. Features Connector A: USB C Connector B: USB C 1m (39in) cable length
€11.00
*
Freefly XL Top Handle
With the XL Top Handle you can go from MoVI XL to handheld quickly! Just release the camera from the MoVI, slip the Top Handle onto the Upper Camera Rail and start shooting handheld. Also great for adding a handle to the camera for...
€359.00
*
Freefly MōVI Pro Spare Grip Disk Kit
Replacement handstops for MoVI Ring Pro (30mm). Made with soft, grippy rubber on one side and smooth plastic on the other side, you can install them to suit your preference. Includes: 2 sets of hand stops 4 M3x6 SHCS
€39.00
*
Freefly MōVI Pro Spare Parts Kit
This MoVI Pro Spare Parts Kit is designed to provide an assortment of items that are useful for maintaining your MoVI Pro in the field. Includes: Qty 4 - Hinge M3 Nylock Qty 4 - Hinge Quick Release Lever Qty 3 - Quick Release Lever...
€50.00
*
Freefly 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount. Features: Lightweight aluminum design Reversible rosette hardware...
€158.00
*
Freefly Pilot Marking Ring
Pilot Focus Module rings can be swapped out as quickly as you can swap out lenses. Mark one ring for each lens for quick swaps on set. Features: Keyed for quick, consistent install Semi translucent so LED shines through for digital marks
€45.00
*
Freefly Offset 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to the MōVI Ring Pro (30mm tube). Rosette is parallel to the tube on this mount. Features: Lightweight aluminum design Reversible rosette hardware Quick release clamp
€158.00
*
Freefly 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 30mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount. Features: Lightweight aluminum design Reversible rosette hardware...
€158.00
*
Freefly Rosette Mount
90 degree rosette mount for Iris/Zoom Module (same as the one that ships with the Iris/Zoom Module or complete Pilot kit).
€55.00
*
Freefly Offset 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is parallel to tube on this mount. Features: Lightweight aluminum design Reversible rosette hardware Quick...
€139.00
*
Freefly 13mm Dual Quick Release Mount
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MoVI Controller, Pilot, MoVI Ring Pro, Adjustable Monitor Mount Quick Release, Low...
€105.00
*
Freefly XL Rod Support
The Rod Support adds an additional point of contact between your dovetail plate and the 19mm rods to increase the rigidity of the camera package for increased performance. This support allows for higher stiffness settings which leads to...
€155.00
*
Freefly MōVI Carbon
The Freefly MoVI Carbon is the world's first handheld and drone-mountable 5-axis camera stabilizer. It's miniaturized and optimized, so that you can shoot in the world's most interesting places. MoVI Carbon features two high bandwidth...
€57,895.00
*
Freefly Pop-N-Lock Refresh Kit
Add an extra quick release plate to your Pop-N-Lock kit , and beef up the receiving plate to handle heavier accessories and monitors. Compatible with all Pop-N-Lock sizes (15mm, 19mm, 25mm, 30mm, 50mm and screw mount). If your dovetail...
€49.00
*
Freefly MōVI Pro Camera Top Handle
With the MoVI Pro Camera Top Handle you can go from MoVI to handheld in seconds! Just release the camera from the MoVI, slip the Top Handle onto the top plate and start shooting handheld. Features: Familiar 25mm tube handle from the MoVI...
€230.00
*
Freefly Adjustable Monitor Mount Quick Release
MoVI users like to customize and modify their rigs for their specific applications. Add this adjustable monitor mount to any 25mm tube (like the handlebars of your MoVI), to get your monitor right where you need it without the need for...
From €140.00
*
Freefly MōVI XL to Mitchell Adapter
MoVI XL features a 6 bolt pattern allowing users to mount the gimbal to a variety of devices. The MoVI XL to Mitchell Adapter adapts the 6 bolt pattern to a standard Mitchell Mount. This can be used with or without the MoVI XL quick...
€625.00
*
Freefly MōVI XL Wiring Harness Spare Kit
MoVI XL Wiring Harness Spare Kit is designed to allow professional gimbal technicians and users to allow simple in field repairs. Features Custom overmolded multi conductor cables High flex, lightweight sheathing In the box Power Hub to...
€440.00
*
Freefly XL Lens Support
XL lens support allows users to rigidly tie the lens into the dovetail plate. This helps to ensure adequate performance with lenses that are sloppy/lack rigidity. The lens support mounts to the 19mm rods and features adjustable lens...
€255.00
*
Freefly XL Dovetail
XL Dovetail allows users to attach XL Camera Plate to the gimbal. XL Dovetail bolts to the MoVI XL, and the XL camera plate attaches to it. XL dovetail features an ARRI compatible dovetail so users can seamlessly move camera from MoVI XL...
€440.00
*
Stabilizing the camera: gimbals
Lightweight, agile and solid: Handheld gimbals by freefly systems for a new dimension in handheld filming. You can connect nearly all common cameras from DSLR to ARRI to these stabilized gimbals models. These gimbals can be operated by just one person or two people at the same time also. One person will follow the shot with the camera and gimbal while a second person handles the controller for all on-camera functions. Another reason for buying a gimbal is its versatility: A gimbal system can be operated with a vehicle, multicopter or also cable controlled.
Gimbal-equipment: professional and comprehensive
When gimbals and cameras are used for car chases or aerial shots you need innovative equipment for mounting and transporting – all available at our avt plus online store. Whether it is adapters, camera plates, spare parts or emergency kits, we got it all. Therefore your camera and gimbal are prepared for every possible situation – you can also use the stabilizer system that makes tracking shots of all sorts possible.