Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
No results were found for the filter!
Tentacle Sync Tentacle to 90° BNC Cable
Tentacle Sync Tentacle to 90° BNC Cable
Bidirectional cable for transmitting timecode between any Tentacle Sync Box and a device that uses a BNC timecode in/out connector and vice versa. This cable features a 90° right-angle BNC connector. You need this cable if you want to...
€25.00 *
Tentacle Sync Tentacle to BNC Cable
Tentacle Sync Tentacle to BNC Cable
You need this straight BNC cable if you want to connect Tentacle to devices that accept and send timecode over BNC like the Panasonic GH5s, Canon C300 / C500, Sony FS7 with XDCA-FS7, PDW 700 / EX3 / PMW 200, ARRI Amira. Features:...
€20.00 *
Tentacle Sync Tentacle to XLR Cable
Tentacle Sync Tentacle to XLR Cable
Standard XLR input connector for transmitting timecode from any Tentacle Sync Box to devices that don’t have built in timecode-capabilities. Utilizing the XLR input, the timecode signal will be recorded as an audio signal on a...
€25.00 *
Tentacle Sync E Bracket
Tentacle Sync E Bracket
This lightweight aluminium bracket for the Tentacle Sync E is exclusively manufactured by LanParte. It can be mounted to any camera rig or directly to a camera with the included 1/4” screw. Easily slide-in mechanism for the Sync E box. A...
From €35.00 *
Tentacle Sync Tentacle to iPhone Sync Cable
Tentacle Sync Tentacle to iPhone Sync Cable
Use this cable to record timecode from any Tentacle Sync Box to your iOS device. Works also with apps such as MovieSlate. Features: 15 cm length (6 inch) Right-angle Neutrik 3.5mm mini jack (3-pin) Straight mini jack (iPhone) Length:...
€25.00 *
Tentacle Sync Tentacle to TA3 Cable
Tentacle Sync Tentacle to TA3 Cable
Special cable for connecting your Tentacle to a Sound Devices 552 or any other device with TA3 inputs. Features: Direction: Bidirectional Right-angle Neutrik 3.5mm mini jack (3-pin) Neutrik REAN TA3 connector Length: 40cm / 16 inches...
€25.00 *
Tentacle Sync Tentacle Microphone Y-Adapter Cable
Tentacle Sync Tentacle Microphone Y-Adapter Cable
Custom-built Y-adapter-cable to hook up any Tentacle Sync Box to cameras with a 3.5mm microphone mini jack input while using an additional external microphone. Audio Timecode is recorded on the left channel and the external microphone on...
€40.00 *
Tentacle Sync XLR to Tentacle Cable
Tentacle Sync XLR to Tentacle Cable
This cable feeds timecode from a device that uses a 3-pin XLR output into any Tentacle Sync Box. You need this cable if you want to jam-sync Tentacle from external timecode sources with XLR outputs such as studio environments. Features:...
€23.75 *
Tentacle Sync Tentacle to Lemo 5-Pin Cable
Tentacle Sync Tentacle to Lemo 5-Pin Cable
Cable to connect any Tentacle Sync box to a device that uses a standard LEMO 5-pin connector. This cable is suitable for Arri Alexa, RED One, Sound Devices, Ambient TCGs, etc. Features: 40 cm length (16 inch) Direction: Mini jack to...
€45.00 *
Tentacle Sync Tentacle to Alexa Mini Cable
Tentacle Sync Tentacle to Alexa Mini Cable
Original 90° LEMO cable to connect any Tentacle Sync Box to an ALEXA MINI camera.LEMO Anglissimo™ connector is pointing upwards (Direction to the red point), so that the Tentacle Sync box can be mounted on top of the Alexa Mini camera...
€75.00 *
Blackmagic Pocket Camera Battery Grip
Blackmagic Pocket Camera Battery Grip
The new Pocket Camera Battery Grip is specially designed for the Blackmagic Pocket Cinema Camera 4K / 6K. This handle with battery holder makes it possible to use two L-series batteries instead of the LP-E6 standard batteries of the...
€197.48 *
Sony CBK-FS7BK
Sony CBK-FS7BK
The CBK-FS7BK Build-up Kit adapts Sony’s ground-breaking PXW-FS7 and PXW-FS7M2 camcorders for shoulder-style shooting typical in ENG (Electronic News Gathering) applications such as interviews and documentaries. This all-in-one solution...
€7,378.00 *
8Sinn V-Mount Battery Plate
8Sinn V-Mount Battery Plate
8Sinn V-Mount Battery Plate Allows to use V-Mount Batteries in cameras that does not have back battery conection. Can serve as adapter for various accesories. Multiple mounting holes for universal camera connection. Standardized...
€41.18 *
Sony XDCA-FS7
Sony XDCA-FS7
The Sony XDCA-FS7 is an expansion module for the PXW-FS7 offering support for multiple cameras including support for encoding with Apple ProRes 422. The PXW-FS7 XDCAM camera comes with internal XAVC and MPEG-2 recording on XQD media. In...
€1,789.92 * €2,120.00 *
IDEA VISION VacuMount cheese plate
IDEA VISION VacuMount cheese plate
IDEA VISION VacuMount cheese plate: for the C3 VacuMount and the C3-C1 VacuMount extension.
€69.00 *
IDEA VISION VacuMount Bowl 100
IDEA VISION VacuMount Bowl 100
VacuMount Bowl 100: Ball Adapter 100; Bowl 100, Connecting Nut; VacuMount Plate
€485.00 *
IDEA VISION Tilt Plate Basic
IDEA VISION Tilt Plate Basic
IDEA VISION Tilt Plate Basic: A lightweight, universal tilt plate for various camera settings (tilt, turn)
€569.00 *
Teradek Replacement Dual Band Wireless Antennas for Cube
Teradek Replacement Dual Band Wireless Antennas...
Replacement Dual Band Wireless Antennas for Cube Replacement dual band wireless antennas for the Teradek Cube One pair of replacement dual band wireless antennas
€20.00 *
Teradek BIT-777 Generic 3 Holes Velcro Mounting Bracket for BOLT
Teradek BIT-777 Generic 3 Holes Velcro Mounting...
Generic 3 Holes Velcro Mounting Bracket for Bolt The Teradek Generic 3 Holes Velcro Mounting Bracket for Bolt keeps your Bolt unit looking nice with this mounting bracket for attaching velcro and preventing heat from the Bolt unit from...
€50.00 *
Teradek Single Gold Mount Battery Plate for Bolt Receiver
Teradek Single Gold Mount Battery Plate for...
Single Gold Mount Battery Plate for Bolt Receiver This Single Battery Plate from Teradek (Female) allows you to power your Bolt Receiver using Gold Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to power...
€290.00 *
Teradek Single V-Mount Battery Plate for Bolt Receiver
Teradek Single V-Mount Battery Plate for Bolt...
Single V-Mount Battery Plate for Bolt Receiver This Single Battery Plate from Teradek (Female) allows you to power your Bolt Receiver using V-Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to power your...
€290.00 *
Teradek Single Gold Mount Battery Plate for Bolt Transmitter
Teradek Single Gold Mount Battery Plate for...
Single Gold Mount Battery Plate for Bolt Transmitter This Single Battery Plate from Teradek (Female) allows you to power your Bolt Transmitter using Gold Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to...
€290.00 *
Teradek Dual Gold Mount Battery Plate for Bolt Receiver
Teradek Dual Gold Mount Battery Plate for Bolt...
Dual Gold Mount Battery Plate for Bolt Receiver This Dual Battery Plate from Teradek allows you to sandwich a Bolt Receiver between your monitor and battery using Gold Mount on both sides. It also offers one D-tap accessory output (50W...
€390.00 *
Teradek Dual V-Mount Battery Plate for Bolt Receiver
Teradek Dual V-Mount Battery Plate for Bolt...
Dual V-Mount Battery Plate for Bolt Receiver This Dual Battery Plate from Teradek allows you to sandwich a Bolt Receiver between your monitor and battery using V-Mount on both sides. It also offers one D-tap accessory output (50W max) on...
€390.00 *
Teradek Dual Gold Mount Battery Plate for Bolt Transmitter
Teradek Dual Gold Mount Battery Plate for Bolt...
Dual Gold Mount Battery Plate for Bolt Transmitter This Dual Battery Plate from Teradek allows you to sandwich a Bolt Transmitter between your camera and battery using Gold Mount on both sides. It also offers one D-tap accessory output...
€390.00 *
Teradek Battery Plate for Panasonic VW-VBG6 & CGA-E/625 to Barrel Conn. Cable (9in/22cm)
Teradek Battery Plate for Panasonic VW-VBG6 &...
Battery Adapter Plate for Panasonic VW-VBG6 This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with Panasonic VW-VBG6 (7.2V) camera batteries.
€150.00 *
Teradek TX/RX Battery Plate for Panasonic CGA-D54 7.2V Cable (7in/17cm)
Teradek TX/RX Battery Plate for Panasonic...
Battery Adapter Plate for Panasonic CGA-D54 This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with Panasonic CGA-D54 (7.2V) camera batteries.
€150.00 *
Teradek Battery Plate for Canon BP-970G to Barrel Conn. (9in/22cm)
Teradek Battery Plate for Canon BP-970G to...
Battery Adapter Plate for Canon BP-970 This Battery Plate fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with Canon BP-970 (7.2V) camera batteries.
€150.00 *
Wooden Camera Ultra Arm Monitor Mount
Wooden Camera Ultra Arm Monitor Mount
The Wooden Camera Ultra Arm monitor holder is an articulated arm with two double ball joints. A monitor or accessory can be positioned in almost any orientation. The 1/420 buttons are not a tool and make the attachments quick and easy....
From €165.00 *
Wooden Camera Safety Dovetail
Wooden Camera Safety Dovetail
The Wooden Camera 8 "ARRI Standard Dovetail is equipped with a safety lock at one end to prevent inadvertent removal of the camera, as well as tapped holes 1 / 4-20 and 3/8-16 for mounting accessories and tripod for Manfrotto, Miller,...
€180.00 *
Panasonic AJ-WM50E
Panasonic AJ-WM50E
The Panasonic AJ-WM50 is a compact wireless module with dual-band technology for P2HD and AG-DVX200 camcorders. With dual-band (2.4 and 5 GHz) technology, the WM50 provides a more reliable, stable network connection in many environments....
€150.00 *
Panasonic DMW-SFU1
Panasonic DMW-SFU1
Update software key for V-Log L video recordings with the DMC-GH4 and DC-GH5. The update software key DMW-SFU1 enables V-Log L recording with the DMC-GH4*/GH5 and offers exceptional flexibility for video recording. The function allows...
€79.99 *
Wooden Camera Sony FS7 Unified Accessory Kit Pro
Wooden Camera Sony FS7 Unified Accessory Kit Pro
The Wooden Camera Sony FS7 Unified Accessory Kit (Pro) is a professional camera support package for the Sony PXW-FS7 camera and uses the new Wooden Camera Unified Baseplate System. Included items Top Plate FS - cheese plate for accessory...
€2,055.00 *
Wooden Camera Dual Director's Monitor Cage v2 - Adapter Set
Wooden Camera Dual Director's Monitor Cage v2 -...
The Wooden Camera Dual Director's Monitor Cage Adapter Kit includes a dual DMCv2 bar and two connectors. For side mounting, a connector on the top is sufficient, but for the additional support a second can be positioned on the bottom....
€45.00 *
Wooden Camera UFF-1 Universal Follow Focus - Base
Wooden Camera UFF-1 Universal Follow Focus - Base
The Wooden Camera UFF-1 Universal Focus (Base) camera is a follow-up focus, compatible with 15mm LW, 15mm Studio and 19mm Rods without the use of adapters. By simply unlocking the clamps and the notches on the bottom it is easy to find...
€1,332.80 *
Wooden Camera V-Lock Base Station and Wedge Kit
Wooden Camera V-Lock Base Station and Wedge Kit
The Wooden Camera V-Lock Base Station and Wedge Kit is a quick release set based on the so-called standard V-Lock or V-Dock. The base station can be attached to 1/420 or 3/8-16 holes using the supplied screws. To prevent twisting, use a...
€135.00 *
2 From 4