No results were found for the filter!
AK-SHU800 Image Processing Unit Product Specs Weight: Approx. 14 kg (30.86 lbs) Dimensions: 424 mm x 130 mm x 401 mm (16-3/4 inches x 5-1/8 inches x 15-13/16 inches) (3U rack mount size, excluding protrusions) Output Format 59.94 Hz:...
€66,000.00
*
Tentacle Pouch in red with one pocket and metal zip. Use this transparent mesh pouch to organize your cables and Tentacle Sync boxes. Features: Size: 23 x 18 cm / 9 x 7 inch One pocket and metal zip Black Tentacle Pouch with two pockets...
€5.00
*
Timecode transmission cable for connecting any Tentacle Sync Box to a device with a 6.3mm jack input. You need this cable, if you want to use cameras and audio-recorders with audio-jack inputs that don’t offer built-in timecode...
€25.00
*
Multi purpose 3.5mm mini jack (3-pin) cable. Use this cable to sync two Tentacle Sync Boxes with each other. Or connect your Tentacle to any camera that uses a 3.5mm microphone-input such as DSLRs (Canon 5D, 6D, 7D, 550D, 60D, Panasonic...
€5.00
*
Custom-built Y-adapter-cable to interfacing Tentacle Sync Box with any camera using a mini jack input while also using a Sennheiser Evolution Bodypack Receiver. The external microphone is recorded on the right channel, while the audio...
€40.00
*
Special cable to feed timecode from any Tentacle Sync Box to all devices with a Flash Synchro Socket (PC) timecode input/output like the Panasonic LUMIX GH5s. Features: 30 cm Coiled Cable Straight 3.5mm Mini Jack Connector (2-pin) 90°...
€10.00
*
Bundle of additional clamps, coloured rubber bands and velcro loop pads for Tentacle Sync E boxes. Features: 2 x Clamps for locking right-angle jacks 4 x Coloured rubber bands 10 x Velcro loop pads 5 x Tentacle stickers
€7.50
*
The Tentacle SYNC E Standard Set is a complete hardware/software solution offering timecode synchronization over Bluetooth. The SYNC E is a user-friendly timecode generator housed in a super small enclosure. The Tentacle SYNC E Standard...
€415.00
*
The Tentacle SYNC E Single Set is a complete hardware/software solution offering timecode synchronization over Bluetooth. The SYNC E is a user-friendly timecode generator housed in a super small enclosure. The Tentacle SYNC E Single Set...
€215.00
*
You need this straight BNC cable if you want to connect Tentacle to devices that accept and send timecode over BNC like the Panasonic GH5s, Canon C300 / C500, Sony FS7 with XDCA-FS7, PDW 700 / EX3 / PMW 200, ARRI Amira. Features:...
€20.00
*
Bidirectional cable for transmitting timecode between any Tentacle Sync Box and a device that uses a BNC timecode in/out connector and vice versa. This cable features a 90° right-angle BNC connector. You need this cable if you want to...
€25.00
*
Cable to feed timecode from a device that uses a standard LEMO 5-pin connector to any Tentacle Sync box. This cable is suitable for Arri Alexa, Sound Devices, Ambient TCGs, etc. Features: Direction: 5-pin LEMO to mini jack Right-angle...
€45.00
*
Standard XLR input connector for transmitting timecode from any Tentacle Sync Box to devices that don’t have built in timecode-capabilities. Utilizing the XLR input, the timecode signal will be recorded as an audio signal on a...
€25.00
*
This lightweight aluminium bracket for the Tentacle Sync E is exclusively manufactured by LanParte. It can be mounted to any camera rig or directly to a camera with the included 1/4” screw. Easily slide-in mechanism for the Sync E box. A...
From €35.00
*
Use this cable to record timecode from any Tentacle Sync Box to your iOS device. Works also with apps such as MovieSlate. Features: 15 cm length (6 inch) Right-angle Neutrik 3.5mm mini jack (3-pin) Straight mini jack (iPhone) Length:...
€25.00
*
Custom-built Y-adapter-cable to hook up any Tentacle Sync Box to cameras with a 3.5mm microphone mini jack input while using an additional external microphone. Audio Timecode is recorded on the left channel and the external microphone on...
€40.00
*
This cable feeds timecode from a device that uses a 3-pin XLR output into any Tentacle Sync Box. You need this cable if you want to jam-sync Tentacle from external timecode sources with XLR outputs such as studio environments. Features:...
€25.00
*
Special cable to feed timecode from any Tentacle Sync Box to all RED cameras with 4-pin LEMO sync port (except RED One). Features: 40 cm length (16 inch) Direction: Mini jack to 4-pin LEMO Right-angle Neutrik 3.5mm mini jack (3-pin)...
€50.00
*
Cable to connect any Tentacle Sync box to a device that uses a standard LEMO 5-pin connector. This cable is suitable for Arri Alexa, RED One, Sound Devices, Ambient TCGs, etc. Features: 40 cm length (16 inch) Direction: Mini jack to...
€45.00
*
Original 90° LEMO cable to connect any Tentacle Sync Box to an ALEXA MINI camera.LEMO Anglissimo™ connector is pointing upwards (Direction to the red point), so that the Tentacle Sync box can be mounted on top of the Alexa Mini camera...
€75.00
*
The new Pocket Camera Battery Grip is specially designed for the Blackmagic Pocket Cinema Camera 4K / 6K. This handle with battery holder makes it possible to use two L-series batteries instead of the LP-E6 standard batteries of the...
€201.00
*
€231.96
*
The CBK-FS7BK Build-up Kit adapts Sony’s ground-breaking PXW-FS7 and PXW-FS7M2 camcorders for shoulder-style shooting typical in ENG (Electronic News Gathering) applications such as interviews and documentaries. This all-in-one solution...
€5,580.00
*
8Sinn V-Mount Battery Plate Allows to use V-Mount Batteries in cameras that does not have back battery conection. Can serve as adapter for various accesories. Multiple mounting holes for universal camera connection. Standardized...
€44.00
*
The Sony XDCA-FS7 is an expansion module for the PXW-FS7 offering support for multiple cameras including support for encoding with Apple ProRes 422. The PXW-FS7 XDCAM camera comes with internal XAVC and MPEG-2 recording on XQD media. In...
€1,750.00
*
€2,120.00
*
IDEA VISION VacuMount cheese plate: for the C3 VacuMount and the C3-C1 VacuMount extension.
€69.00
*
VacuMount Bowl 100: Ball Adapter 100; Bowl 100, Connecting Nut; VacuMount Plate
€485.00
*
IDEA VISION Tilt Plate Basic: A lightweight, universal tilt plate for various camera settings (tilt, turn)
€495.00
*
The Vocas Top handgrip Pro kit for Sony VENICE handgrip dovetail system perfectly. The handgrip can be placed more forward than the original Sony handle for a better balance. The separate 19 mm viewfinder adapter for top handgrip allows...
€556.00
*
€585.00
*
Color Identification Bracket for Bolt 1000/3000 Receiver Teradek Bolt Accessory Identification Color Plate for Bolt 1000/3000 Receiver Colored metal plate for Teradek Bolt Receiver (1000/3000) Designed for marking related Transmitters...
€10.00
*
Teradek Hotshoe 2.5'' Thumb Screw for Cube / Bond Teradek Hotshoe Mounting Hardware 2.5'' Thumb Screw for Cube / Bond
€34.00
*
Replacement Dual Band Wireless Antennas for Cube Replacement dual band wireless antennas for the Teradek Cube One pair of replacement dual band wireless antennas
€20.00
*
Teradek Hotshoe 1.25'' Thumb Screw for Cube / VidiU Teradek Hotshoe Mounting Hardware 1.25'' Thumb Screw for Cube / VidiU
€30.00
*
Generic 3 Holes Velcro Mounting Bracket for Bolt The Teradek Generic 3 Holes Velcro Mounting Bracket for Bolt keeps your Bolt unit looking nice with this mounting bracket for attaching velcro and preventing heat from the Bolt unit from...
€50.00
*
Single Gold Mount Battery Plate for Bolt Receiver This Single Battery Plate from Teradek (Female) allows you to power your Bolt Receiver using Gold Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to power...
€290.00
*
Single V-Mount Battery Plate for Bolt Receiver This Single Battery Plate from Teradek (Female) allows you to power your Bolt Receiver using V-Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to power your...
€290.00
*
Single Gold Mount Battery Plate for Bolt Transmitter This Single Battery Plate from Teradek (Female) allows you to power your Bolt Transmitter using Gold Mount batteries. The plate also offers a D-tap accessory output (50W/14.4V max) to...
€290.00
*