CVW PRO VUE

The set consists of a classic transmitter and a 5.5" monitor with integrated radio receiver. Ideal for use with follow focus systems for tracking focus during production. The transmission works in real time with a delay of less than 1ms. With a brightness of 1500 nits, the image is clear even in bright daylight. The set can be expanded with additional receivers. This allows the video to be passed directly to a mixer via SDI / HDMI.

General features:

• Set of radio transmitter and radio monitor
• Range at visual contact: 200m
• Transmission speed: under 1ms
• For SDI & HDMI cameras
• Video in Full HD 1080p (60fps)
• Expandable with additional receivers (more detailed information below)
• Frequency range (EU): 5.1 - 5.9 GHz
• Bandwidth: 40MHz
• Multiple channels freely selectable
• Audio format: PCM

Video formats:

• 1080p (23.98/24/25/30/50/60 fps)
• 1080i (50/59.94/60 fps)
• 720p (50/59.94/60 fps)
• 576p, 576i, 480p, 480i

Key data of the monitor

• 5.5" LED touchscreen panel
• Resolution: 1920 x 1080 pixels
• Aspect ratio: 4:3 / 16:9 / 1.85:1 / 2.35:1
• Brightness: 1500 nits
• Contrast ratio: 1000:1
• Viewing angle with precise color representation: up to 178° (H/V)
• Antennas installed inside
• Compatible with transmitters from other manufacturers (currently confirmed by tests with the following brands: Hollyland, VAXIS, LANGHI)
• Tolerated temperature range: -10 to +50 ° C (during operation) / -40 to +80 ° C (during storage)

Features

• Follow Focus Dashboard. Information about focus, aperture and zoom can be shown on the display*, so the view does not have to move back and forth between monitor and follow focus panel (*currently supported by Movcam systems)
• HDR
• 3D-Lut import possible
• False Color
• Zebra
• Brightness Histogram
• RGB Histogram
• Luminance Waveform
• Audio Meter
• Aspect Ratio
• Image Flip
• Monochrome
• Anamorphic

Key data of the transmitter (classic radio link)

• SDI Input / SDI Loop Out
• HDMI input
• Manual channel change with buttons
• Display for channel indication and signal information
• Tolerated temperature range: -10 to +50 ° C (during operation) / -40 to +80 ° C (during storage)

Connections

• Monitor
• 1x USB type A
• 1x 3.5mm jack socket for audio
• 1x NP-F battery mount
• 1/4" female thread on the bottom side (e.g. for Magic Arm)
• Transmitter
• 1x HD-SDI input
• 1x HD-SDI loop through output
• 1x HDMI input
• 1x Mini USB (for firmware updates)
• 1x DC In 7 - 36 V, 2-pin connector (female), compatible to LEMO)
• 2x antenna
• 1x 1/4" female thread on bottom side for Magic Arm

Power supply

• Monitor
• Power consumption: 15W (at 7~36 V DC)
• SONY N-PF730 battery mount
• via external Follow Focus System
• via D-Tap (adapter cable included)
• Transmitter
• Power consumption: 12W (at 6~17V)
• via D-Tap (adapter cable included)

Dimensions and weight

• Monitor
• 186mm x 112mm x 52mm (incl. wooden handles)
• 144mm x 112mm x 33mm (without wooden handles)
• 494g (incl. wooden handles)
• 358g (without wooden handles)
• Transmitter
• 74mm x 318mm x 33mm (incl. antennas)
• 74mm x 128mm x 33mm (without antennas)
• 358g (incl. antennas)
• 312g (without antennas)
• Case incl. complete scope of delivery
• 340mm x 310mm x 125mm
• 3,4kg

Included in the set

• 1x transmitter
• 1x wireless monitor (with NP-F battery mount + integrated antenna)
• 3 antennas (2 pcs. needed by the transmitter + 1 pcs. for reserve)
• 1x BNC cable, 80cm (to connect camera and transmitter with SDI)
• 1x DC adapter cable for transmitter (D-Tap to 2pin connector, compatible to LEMO)
• 1x DC adapter cable for monitor (D-Tap to 6pin connector, compatible to LEMO)
• 1x articulated arm with cold shoe adapter (extended 170mm)
• 1x V-Mount adapter (to attach transmitter to camera)
• 1x Rugged plastic case with custom-fit foam