The following products have been found matching your search "studiolens": 52
Or did you mean:
studiotechnik
|
studio2
|
studiomini
|
studioset
|
studio4k
|
studiopro2
|
studio12g
We have many more products and manufacturers that are not listed in our shop yet. If you can not find your wished product below, please ask us!
No results were found for the filter!
Rode NT2-A Studio Solution Set
NT2-A Studio Solution Set
Large diaphragm condenser microphone with selectable polar pattern. 157 dB SPL, very low self noise (7 dBA). Switchable pre-attenuation (0 dB, -5 dB, -10 dB), switchable high pass filter (Flat, 40 Hz, 80 Hz)....
€321.00
*
Blackmagic DeckLink Studio 4K
PCIe card to capture and playback 6G-SDI, HDMI 4K and Analog in SD, HD, 2K and Ultra HD
If you work with a wide range of analog video and audio gear, and need to move seamlessly between SD, HD, 2K and Ultra HD, then DeckLink Studio 4K...
€561.29
*
Panasonic AV-HS60D1G
Internal Storage Option (SSD) for the AV-HS6000 2ME Video Switcher System
The AV‑HS6000 is a 2ME model in the HS series that employs a newly designed, easy-to-use GUI Control Panel to support accurate switching.
Even with its...
€2,000.00
*
Blackmagic DeckLink 4K/HD Extreme 3 Breakout Cable
DeckLink 4K/HD Extreme 3 breakout cable
€119.53
*
€125.82
*
Blackmagic Netzteil für UltraStudio, SmartView...
Blackmagic Design Power Supply
Power supply for Blackmagic UltraStudio, Blackmagic SmartView Duo, Blackmagic HyperDeck Studio and Blackmagic Video Assist 4K
€89.06
*
€93.75
*
Blackmagic 6G SFP Optical Modul
Blackmagic 6G SFP optical modul for Blackmagic optical fiber devices
€218.66
*
Blackmagic 3G SFP Optical Modul
Blackmagic 3G SFP Optical Modul
Blackmagic 3G SFP optical module for Blackmagic optical fiber devices
€104.77
*
Blackmagic Teranex Mini - Rack Shelf
Rack Shelf for Blackmagic Teranex Mini Converters
Teranex Mini are designed to be racked side by side, with three converters fitting in 1RU, six in 2RU, and nine in 3RU. When multiple units are racked side by side, variable speed fans...
€81.01
*
Blackmagic Fusion Studio Software
The world’s most advanced visual effects and motion graphics solution
Fusion is the world’s most advanced compositing software for visual effects artists, broadcast and motion graphic designers and 3D animators. With over 25...
From €290.92
*
Blackmagic Design Power Supply
Blackmagic Design Power Supply
Power supply for the Blackmagic Video Assist and the Blackmagic Micro Cameras
€24.94
*
Blackmagic Netzteil für DaVinci/ATEM 12V70W
Blackmagic Design Power Supply
Power supply for DaVinci/ATEM (12V/70W)
€82.77
*
€87.13
*
Blackmagic Design Power Supply for HyperDeck...
Blackmagic Design Power Supply
Power supply for the Blackmagic Mini Converters and Blackmagic HyperDeck Shuttle
€60.00
*
€60.66
*
Blackmagic Netzteil für URSA 100W XLR
Blackmagic Design Power Supply
Power supply for Blackmagic URSA cameras
€160.00
*
AJA KUMO CP2
KUMO CP2 is a 2RU control panel that can be used in standalone or networked configurations suitable for all KUMO routers including the KUMO 6464. Connecting via Ethernet to the same network as KUMO routers, KUMO CP2 enables full...
€977.00
*
Blackmagic Ultimatte Smart Remote 4
Ultimatte Smart Remote 4 - Control up to 8 Ultimattes at once!
The Ultimatte Smart Remote 4 is a touch screen remote control that can be connected to the Ultimatte 12 via Ethernet. Use the Smart Remote either on your desktop or...
€4,115.38
*
Wooden Camera 15mm Rod
The Wooden Camera 15mm Rods are ideal for the montage of attachments such as a Follow Focus, Matte Box, Lens Support, Servomotors uv.m. Available in different lengths.
Weight
3 "- 36 g
6 "- 72 g
9 "- 110 g
12 "- 152...
From €20.00
*
Angelbird AtomX SSDmini Handle
The adapter allows to use the new AtomX SSDmini (ATOMXMINI500PK, ATOMXMINI1000PK, ATOMXMINI2000PK) in 7" or 19" Atomos recorders.
Without the adapter the AtomX SSDmini can only be used with the Atomos Ninja V (ATOMNJAV01).
Scope of...
€31.75
*
Blackmagic HyperDeck Extreme Rack Kit
Blackmagic Rack Mount Kit
Rack kit to mount two Blackmagic HyperDeck Extreme 8K HDR or Blackmagic HyperDeck Extreme Control units side by side.
Rack kit to mount two HyperDeck Extreme models side by side
Lightweight kit that's...
€200.18
*
Blackmagic DaVinci Resolve Editor Keyboard...
Editor Keyboard for DaVinci Resolve 16
The DaVinci Resolve Editor Keyboard is designed for professional editors who need to work faster and turn around work quickly. More than just a simple keyboard, the DaVinci Resolve Editor...
€470.00
*
Blackmagic MultiDock 10G
The Blackmagic MultiDock 10G is an advanced docking station that lets you access four separate SSDs via a super-fast USB C port for 10 Gbps. Unlike cheap consumer adapters, the Blackmagic MultiDock 10G is designed specifically for the...
€580.45
*
Tentacle Sync Tentacle to Lemo 3-Pin
Special cable to feed Timecode from any Tentacle Sync Box to all devices with a Micro LEMO 3-pin timecode input like A10-TX transmitter from Audio Limited, Zaxcom ZFR 400
Features:
40 cm length (16 inch)
Original right-angle...
€50.00
*
Tentacle Sync Tentacle to Alexa Mini Cable
Original 90° LEMO cable to connect any Tentacle Sync Box to an ALEXA MINI camera.LEMO Anglissimo™ connector is pointing upwards (Direction to the red point), so that the Tentacle Sync box can be mounted on top of the Alexa Mini camera...
€75.00
*
Tentacle Sync Tentacle to Lemo 5-Pin Cable
Cable to connect any Tentacle Sync box to a device that uses a standard LEMO 5-pin connector. This cable is suitable for Arri Alexa, RED One, Sound Devices, Ambient TCGs, etc.
Features:
40 cm length (16 inch)
Direction: Mini...
€45.00
*
Tentacle Sync Tentacle to RED Cable
Special cable to feed timecode from any Tentacle Sync Box to all RED cameras with 4-pin LEMO sync port (except RED One).
Features:
40 cm length (16 inch)
Direction: Mini jack to 4-pin LEMO
Right-angle Neutrik 3.5mm mini jack...
€50.00
*
Tentacle Sync Lemo to Tentacle Cable
Cable to feed timecode from a device that uses a standard LEMO 5-pin connector to any Tentacle Sync box. This cable is suitable for Arri Alexa, Sound Devices, Ambient TCGs, etc.
Features:
Direction: 5-pin LEMO to mini jack...
€45.00
*
Tentacle Sync Tentacle to XLR Cable
Standard XLR input connector for transmitting timecode from any Tentacle Sync Box to devices that don’t have built in timecode-capabilities. Utilizing the XLR input, the timecode signal will be recorded as an audio signal on a...
€25.00
*
Tentacle Sync XLR to Tentacle Cable
This cable feeds timecode from a device that uses a 3-pin XLR output into any Tentacle Sync Box. You need this cable if you want to jam-sync Tentacle from external timecode sources with XLR outputs such as studio environments....
€23.75
*
Tentacle Sync Tentacle to 90° BNC Cable
Bidirectional cable for transmitting timecode between any Tentacle Sync Box and a device that uses a BNC timecode in/out connector and vice versa. This cable features a 90° right-angle BNC connector. You need this cable if you want to...
€25.00
*
Tentacle Sync Tentacle to BNC Cable
You need this straight BNC cable if you want to connect Tentacle to devices that accept and send timecode over BNC like the Panasonic GH5s, Canon C300 / C500, Sony FS7 with XDCA-FS7, PDW 700 / EX3 / PMW 200, ARRI Amira.
Features:...
€20.00
*
Tentacle Sync Tentacle to iPhone Sync Cable
Use this cable to record timecode from any Tentacle Sync Box to your iOS device. Works also with apps such as MovieSlate.
Features:
15 cm length (6 inch)
Right-angle Neutrik 3.5mm mini jack (3-pin)
Straight mini jack (iPhone)...
€25.00
*
Tentacle Sync Tentacle to TA3 Cable
Special cable for connecting your Tentacle to a Sound Devices 552 or any other device with TA3 inputs.
Features:
Direction: Bidirectional
Right-angle Neutrik 3.5mm mini jack (3-pin)
Neutrik REAN TA3 connector
Length: 40cm /...
€25.00
*
Tentacle Sync Tentacle Microphone Y-Adapter Cable
Custom-built Y-adapter-cable to hook up any Tentacle Sync Box to cameras with a 3.5mm microphone mini jack input while using an additional external microphone. Audio Timecode is recorded on the left channel and the external microphone...
€40.00
*
Tentacle Sync Tentacle to 6.3mm Jack Cable 90°
Timecode transmission cable for connecting any Tentacle Sync Box to a device with a 6.3mm jack input. You need this cable, if you want to use cameras and audio-recorders with audio-jack inputs that don’t offer built-in timecode...
€25.00
*
Tentacle Sync Tentacle to DSLR Cable
Multi purpose 3.5mm mini jack (3-pin) cable. Use this cable to sync two Tentacle Sync Boxes with each other. Or connect your Tentacle to any camera that uses a 3.5mm microphone-input such as DSLRs (Canon 5D, 6D, 7D, 550D, 60D, Panasonic...
€5.00
*
Tentacle Sync Tentacle Bodypack Y-Adapter Cable
Custom-built Y-adapter-cable to interfacing Tentacle Sync Box with any camera using a mini jack input while also using a Sennheiser Evolution Bodypack Receiver. The external microphone is recorded on the right channel, while the audio...
€40.00
*