Products from Freefly Systems
Over a decade of experience in the professional cinematography industry has given Freefly a unique ability to develop and bring innovative products to market that serve the needs of cinema and aerial professionals. Freefly is passionate about pushing the envelope technologically in order to provide thier customers with the tools to capture amazing footage.
avt plus is an official Freefly dealer. We deliver from Germany and are also your contact for support and workshops.
Also visit our special Freefly landingpage.
No results were found for the filter!
Freefly Toad in the Hole M3 Quick Release...
The Toad in the Hole M3 Quick Release Receiver is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi*. It attaches to the pan (upper) motor of any Movi and allows the...
€270.00
*
Freefly Vibration Isolator Refresh Kit
Freefly Vibration Isolator Refresh Kit - Replacement parts kit for wear parts on Alta X. Includes two changes of pan isolators and one set of isolation structure rubber bumpers (can also be used to replace ActiveBlade bumpers*). *Black...
€27.00
*
Freefly Wave (2TB)
The Freefly Wave - designed to be the most efficient high speed camera. It’s small, light, and insanely fast. Locking E Mount Ultra lightweight locking E mount so you can adapt to anything. Resolution & Speed Wave processes up to...
€7,999.00
*
Freefly Movi Pro Wave Remote Control Cable
Connect your Wave camera to the Movi Pro and trigger start/stop record from any supported Freefly ecosystem controller (Mōvi Controller, MIMIC or Pilot). Features Connector A: Molex Microfit Connector B: JST GH 6PIN High flex,...
€20.00
*
Freefly Movi Pro to TB50/TB55 Battery Adapter
For users needing longer runtime than the stock Movi Pro/Movi Carbon batteries, these adapters will allow you to use DJI TB50 and TB55 batteries. This is also useful for people using DJI Drones if they are traveling and only want to...
€439.00
*
Freefly D-Tap Cable for FRX Pro
Replacement D-tap cable to provide power for the FRX Pro installed on a Movi Controller. Each FRX Pro pair for Movi ships with this cable, but if you lose it or want a spare, this is it.
€49.00
*
Freefly Movi Pro / XL Phantom Start/Stop Cable...
This cable allows Movi Pro / XL users to access the Vision Research Start / Stop command protocol. This allows users to start and stop camera recording from up to 182m away using the Movi Controller, MIMIC, Pilot or compatible Freefly...
€330.00
*
Freefly Toad in the Hole M4 Quick Release...
This version of the Toad in the Hole Receiver (M4) is a beefed up version of our original quick release unit, which provides an easy mount and release solution for your heavy duty applications and payloads.* It allows the operator to...
€275.00
*
Freefly 12V DC to DC Regulator for Alta X
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 12V accessories from the main batteries. Features XT30 Female connector for powering accessories Pulls power from flight packs to simplify...
€310.00
*
Freefly 5V DC to DC Regulator for Alta X
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 5V accessories from the main batteries. Features XT30 Female connector for powering accessories Pulls power from flight packs to simplify battery...
€316.00
*
Freefly Alta X Short Quick Release Mount
The Alta X Short Quick Release Mount allows Alta X users to mount Toad in the Hole equipped payloads or landing gear directly to the bottom / top of the Alta X bypassing the standard vibration isolation system. For some use cases rigid...
€165.00
*
Freefly Accessory Clamp (15mm)
Using four of these 15mm aluminum accessory mount clamps allows users to attach the Cargo Tray to the Cargo Landing Gear via two M3 threaded holes, or to mount any other accessory off of the 15mm landing gear down tubes or cross braces....
€27.00
*
Freefly Cargo Landing Gear
Freefly Cargo Landing Gear provides Alta users with an expandable and adaptable platform to help speed the integration of their custom payloads. The Cargo Landing Gear can be used for package delivery, LiDAR setups, logging, LED lights,...
€1,250.00
*
Freefly Cargo Tray Kit
Upgrade your Cargo Landing Gear or Alta X with the Cargo Tray Kit! This Cargo Tray allows you to deliver packages on top of the Alta X, or can be added to the Cargo Landing Gear to allow bottom mounted package delivery on a Toad in the...
€327.00
*
Freefly Carbon Tube Kit (for Cargo Landing Gear)
Carbon Tube 15 x 180mm Kit This kit comes with four 15mm Carbon tubes that are 180mm long. These tubes are 270mm shorter than the stock Cargo Landing Gear tubes (450mm stock length) and can be used to make a shorter landing gear or used...
From €44.00
*
Freefly Alta X Vibration Isolator Cartridges
These tool-less vibration isolator cartridges come in different durometers (stiffness) for different payload weights and flying conditions. You can even mix and match durometers to expand your options, up to nine total cartridges....
€99.00
*
Freefly Skyview Landing Gear for Alta X
Skyview Landing Gear is used to mount the flight packs and provide a base to land the Alta X when the payload is top-mounted or you are not flying a MoVI Pro. Required for operation if not flying a Movi with its own landing gear, or for...
€1,020.00
*
Freefly Alta X 12S Flight Packs - 16AH (single)
Power your Alta X with the batteries in use, that fit perfectly! Recharge rapidly using an XT-90-capable LiPo battery charger, available separately. Each Alta X flight requires a pair of 12S batteries. Flight times will vary based on...
€899.00
*
Freefly CW Single Motor Propeller Set for Alta X
This pair of replacement clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 2 or 4. Props are supplied as a weight matched and balanced pair. Only fit props in the factory supplied...
€111.00
*
Freefly Alta X Case
Transport your Alta X all over the world in this tough hard case . The custom foam insert was designed and tested to keep your Alta X secure and safe, no matter how you ship or travel with it. Features: Tough Pelican Hardcase Built in...
€2,718.00
*
Freefly Spare Parts Kit for Alta X
The Freefly Spare Parts Kit for Alta X is included with the purchase of every Alta X. It includes replacement wear-parts, fasteners and accessories for Alta X. In the Box Qty 3 - 10A Mini Blade Fuses Qty 4 - Replacement battery straps...
€90.00
*
Freefly CCW Single Motor Propeller Set for Alta X
This pair of replacement counter-clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 2 or 4. Props are supplied as a weight matched and balanced pair. Only fit props in the factory...
€111.00
*
Freefly Mōvi Ring Pro II
The Freefly Movi Ring Pro II is designed to allow users to create content more quickly and effectively than ever before. It features a built in stand for instant set down to allow users to rest between shots. The built in stand allows...
€999.00
*
Freefly FRX Pro
The Freefly FRX Pro is the next generation of wireless control for Movi Pro, Movi Carbon, and Movi XL. Its increased power and improved noise rejection give it unprecedented range while improvements to the binding process make it easy to...
€849.00
*
Freefly 13mm to 15mm Double Clamp Mount
If you need to offset your 13mm mount, and adapt to a 15mm accessory, use this mount, with adjustable levers on each end. Handy for mounting accessories equipped with a 13mm Quick Release Plug (or the low profile version), to the top or...
€49.00
*
Freefly 13mm Double Clamp Mount
If you need to offset your 13mm mount, use this 13mm Double Clamp Mount with adjustable levers on each end. Pair this with any 13mm Adjustable Quick Release product for creative options to mount your accessories. Features Compatible with...
€49.00
*
Freefly 13mm Low Profile Mount
Similar to our standard 13mm Quick Release Plug, but much lower profile! Great for mounting monitors, transmitters, receivers and other ¼ 20 equipped gear in tight spaces! Features Lightweight and low profile design 13mm Aluminum Quick...
€12.00
*
Freefly 13mm Male to Female Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Movi. Use this 13mm Male to Female Right Angle Mount to connect a male and female 13mm adapter at a right angle! Features Compatible...
€24.00
*
Freelfy 13mm Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Movi. Use this Right Angle Mount to combine two adjustable 13mm adapters Features Compatible with all Freefly 13mm accessories mounts...
€24.00
*
Freefly 13mm to 13mm Mount
Benötigen Sie einen 13mm Spud-Adapter von einem male to male? Hier ist er! Merkmale Kompatibel mit allen Freefly 13mm Zubehörhalterungen Leichte Aluminiumkonstruktion Zwei 13-mm-Montagepunkte mit Innengewinde ¼ 20 für Flexibilität beim...
€17.00
*
Freefly 13mm Jog Mount
Need a little bit of extra room, a bit of extra clearance or an additional option for rotation with your 13mm mount? Use this offset adapter for 13mm male to 13mm female. Features Compatible with all Freefly 13mm accessories mounts...
€38.00
*
Freefly MoVI Pro Pan Mount Upgrade
MoVI Pro Pan Mount Upgrade - This is an aluminum MoVI Pro pan mount upgrade that replaces the original carbon fiber mount to increase the strength for high force applications (car mount, cable cam use, nose mounting, etc). Includes: Qty...
€17.00
*
Freefly Wheel to MIMIC Cable
The Freefly Wheel to MIMIC Cable is a durable overmolded cable, used to connect MIMIC to MoVI Wheels. Connector A: 6 pin Molex Microfit Connector B: Locking GH connector 300mm (11.81") cable length
€27.00
*
Freefly USB 2.0 to A Cable - M/M USB Cable- 1m
The Freefly USB 2.0 to A Cable - M/M USB Cable- 1m is a USB 2.0 cable used to connect your MoVI Controller to your USB A equipped computer for firmware updates. Specs: Connector A: USB A - Male Connector B: USB A - Male 1m cable length
€15.00
*
Freefly MōVI Controller to Wheel Cable
MoVI Controller to Wheel Cable - Durable overmolded cable, used to connect MoVI Wheels to MoVI Controller. (500mm Length)
€110.00
*
Freefly Quick Release 25mm post
Freefly Quick Release 25mm post - Bobbins are used to mount the wheels and MoVI Controller to the included cheeseplate, tripods, or anywhere with a 1/4" hole.
€37.00
*